0.91 inch 128×32 Blue OLED Display Module I2C/IIC Interface
₹180Specifications:
- Driving IC: SSD1306
- Operating Voltage: 3.3-5V
- Resolution Ratio: 128 x 32
- Text Color: White
- Background Color: Black
SENSORS
MODULES
Showing 1–20 of 23 results
-
-
0.96 Inch I2C/IIC 4pin OLED Display Module (Blue)
₹170Specifications:
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
- Dimension : 2 x 2 cm
-
5V DC TOY Motor DIY
₹15Specifications:
- Nominal Operating Voltage: 5V
- Operating Voltage Range: 3.0V to 6.0V
- Nominal Voltage: 3V
- No Load Current: 0.27A
- Maximum Current: 1.05A
- No Load Speed: 13,500 revolutions per minute (r/min)
- Maximum Speed: 10,740 revolutions per minute (r/min)
- Stall Torque: 68g.cm
- Maximum Torque: 14g.cm
- Stall Current: 4.10A
-
60 RPM BO Motor – (Single Shaft Dual Shaft) Straight
₹60Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Single D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kg/cm
-
65mm Robot Wheel for BO Motors (Yellow)
₹20Specifications:
- Loading Capacity (Kg): 2.5
- D hole For BO Motor: 6 mm
- Weight (gm): 34
- Wheel Diameter(mm): 65 mm
- ColorBlack (Tyre): Yellow (Rim)
- Wheel Width 27 mm
- Body Material Plastic
- Grip Material Rubber
- Center Shaft Hole Diameter
- 4mm-(round side) and 3.5mm-(flat side)
-
7-Segment Display – Common Anode – LED Display
₹15Specifications
Parameter Details Display Type 7-Segment LED Display Configuration Common Cathode Color Red Digit Size 0.56 inches Current Consumption Low Power Mounting Type PCB Mounting RoHS Compliant Yes -
A4988 Stepper Motor Driver with Heatsink – 1.5A
₹90Specifications
Parameter Value Supply Voltage 8V – 35V Operating Current (Without Heatsink) 1A per phase Maximum Current (With Heatsink) 2A per phase Logic Voltage Input 3V – 5.5V Step Modes Full, ½, ¼, ⅛, 1/16 Protection Features Thermal shutdown, UVLO, short circuit protection Additional Cooling Required for operation above 1A -
Bank rate Display
₹17,500Specifications:
- Display Parameters: As required (16 to 18 parameters)
- Text Color: Red
- Dimensions: 14-inch x 14-inch cabinet
- Character Size: 40MM (1.7 inches)
- Mounting Type: Wall-mounted
- Country of Origin: India
-
BO Motor dual shaft 60 RPM – Straight
₹60Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
-
DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch
₹80Specifications:
- Working voltage: DC4.5V-35V
- Output: 0-5A 90W
- PWM duty cycle: 1% -100%
- PWM frequency: 20KHz
- Size: 30.5 * 26.5 * 13.5mm
-
GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
₹160Specifications
- Operating Voltage: 4.8V – 6V DC
- Output Current: 15mA (5.0V)
- Output Signal: 1.5ms ± 0.5ms
- Knob Diameter: 12mm
- Dimensions: 35×30×15mm (L×W×H)
- Weight: 8g
- Shipping Weight: 12g
- Shipping Dimensions: 6 × 4 × 3 cm
- Color: Blue
-
GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
₹160📌 Specifications
🔹 Operating Voltage: 4.8V – 6V DC
🔹 Output Current: 15mA (5.0V)
🔹 Output Signal: 1.5ms ± 0.5ms
🔹 Dimensions: 35mm x 30mm x 15mm
🔹 Knob Diameter: 12mm
🔹 Weight: 8g
🔹 Color: Blue -
IIC/I2C Serial Interface Adapter Module
₹75Features:
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
-
L298N Based Motor Driver Module for DIY Projects
₹150Specifications
- Operating Supply Voltage: Up to 46V
- Total DC Current: Up to 4A (2A per channel)
- Logic Voltage: 5V
- Drive Voltage: 5V – 35V
- Logic Current: 0-36mA
- Drive Current: 2A (max per bridge)
- Maximum Power: 25W
- Dimensions: 44 x 44 x 28 mm (LxWxH)
- Weight: 26g
-
LCD16x2 LCD Display Yellow Backlight
₹120Specifications
- Display Mode: STN (Super Twisted Nematic)
- Model: LCD1602
- Character Format: 16 characters x 2 lines
- Font Style: 5×8 dots per character
- Power Supply: 5V ±10%
- Backlight: Yellow
- Dimensions: 80 x 36 x 10 (LxWxH) mm
-
MAX7219 LED Dot Matrix
₹230Specifications
- Power Supply: 5V (via VCC pin)
- Input/Output Control: Serial input/output
- Driver Chip: MAX7219
- LED Configuration: Supports 8×8 matrix or 8-digit 7-segment displays.
- Input Current: 320 mA
- PCB Dimensions: 50×32 mm (LxW)
-
MAX7219 LED Dot Matrix 4-in-1 Display Module
₹490Specifications
- Driver IC: MAX7219
- Input Voltage: 5V
- Maximum Operating Current: 320mA
- LED Color: Red
- LED Matrix Dimensions: 32×32×6mm (L×W×H)
- PCB Size: 128×32mm (L×W)
- Communication Interface: Serial (SPI-like protocol)
-
Servo SG90 9g 180 Degree Motor for Arduino
₹90Specifications:
- Universal for JR and FP connector § Cable length: 25cm
- No load; Operating speed:
0.12 sec / 60 degree (4.8V),
0.10 sec / 60 degree (6.0V)
- Temperature: -30~60’C
- Dead band width: 5us
-
SimonK 30A BLDC ESC Electronic Speed Controller
₹370Specifications
- Operating Voltage: 2-3S LiPo Battery
- Current Rating: 30A Continuous, 40A Peak
- BEC Output: 5V/2A
- Start Modes: Normal, Soft, Super-Soft
- Compatibility: Fixed-wing aircraft, helicopters, multi-rotors
- Safety Features: Backward-polarity protection, 5V receiver line protection
- Heat Management: Heat sink with thermal membrane
- Programmability: Fully programmable via RC remote control
-
Submersible Mini Water Pump 3-6V DC
₹70Specifications:
- Operating Voltage: 2.5 ~ 6V
- Operating Current: 130 ~ 220mA
- Flow Rate: 80 ~ 120 L/H
- Maximum Lift: 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
End of content
End of content
SPDT Slide Switch (Pack of 2) 
ARDUINO UNO Development Board DIP 
