Home - Big Electronics

DIY BOARDS
SENSORS
MODULES

WIDE RANGE OF

SHOP NOW

“65mm Robot Wheel for BO Motors (Yellow)” has been added to your cart. View cart

Showing all 19 results

12x12x12mm Tactile Push Button Switch (Pack of 3)
0 out of 5
₹20
Specifications:
- Dimensions: 12x12x12 mm
- Operating Force: 3.0N / 3.6N
- Stroke Length: 1.05mm
- Design: High-precision mechanism
- Shaft Shape: Round
Add to cart
4×4 Matrix Keypad Membrane Switch
0 out of 5
₹60
Specifications:
- Matrix: 4×4 Matrix Membrane Keypad
- Connector: 8-pin connector
- Mounting: Adhesive mounting with sticker on the back side
- Operating Temperature: 0 to 60 degrees Celsius
- Humidity: 40 degrees Celsius, 90%-95% (240 hours)
- Flexible Circuit Length: Approximately 3.3 inches (83 mm)
Add to cart
5V DC TOY Motor DIY
0 out of 5
₹15
Specifications:
- Nominal Operating Voltage: 5V
- Operating Voltage Range: 3.0V to 6.0V
- Nominal Voltage: 3V
- No Load Current: 0.27A
- Maximum Current: 1.05A
- No Load Speed: 13,500 revolutions per minute (r/min)
- Maximum Speed: 10,740 revolutions per minute (r/min)
- Stall Torque: 68g.cm
- Maximum Torque: 14g.cm
- Stall Current: 4.10A
Add to cart
60 RPM BO Motor – (Single Shaft Dual Shaft) Straight
0 out of 5
₹60
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Single D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kg/cm
Add to cart
65mm Robot Wheel for BO Motors (Yellow)
0 out of 5
₹20
Specifications:
- Loading Capacity (Kg): 2.5
- D hole For BO Motor: 6 mm
- Weight (gm): 34
- Wheel Diameter(mm): 65 mm
- ColorBlack (Tyre): Yellow (Rim)
- Wheel Width 27 mm
- Body Material Plastic
- Grip Material Rubber
- Center Shaft Hole Diameter
- 4mm-(round side) and 3.5mm-(flat side)
Add to cart

A4988 Stepper Motor Driver with Heatsink – 1.5A

0 out of 5

₹90

Specifications

Parameter	Value
Supply Voltage	8V – 35V
Operating Current (Without Heatsink)	1A per phase
Maximum Current (With Heatsink)	2A per phase
Logic Voltage Input	3V – 5.5V
Step Modes	Full, ½, ¼, ⅛, 1/16
Protection Features	Thermal shutdown, UVLO, short circuit protection
Additional Cooling	Required for operation above 1A

Add to cart

BO Motor dual shaft 60 RPM – Straight
0 out of 5
₹60
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
Add to cart
DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch
0 out of 5
₹80
Specifications:
- Working voltage: DC4.5V-35V
- Output: 0-5A 90W
- PWM duty cycle: 1% -100%
- PWM frequency: 20KHz
- Size: 30.5 * 26.5 * 13.5mm
Add to cart
DPDT ON-OFF Rocker Switch – 2 Amp (Pack of 3)
0 out of 5
₹20
The DPDT ON-OFF Rocker Switch is a simple, reliable, and versatile component for powering your electronic projects and devices. Designed for easy installation and operation, this switch is suitable for various applications requiring efficient power control.

Add to cart
GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
0 out of 5
₹160
Specifications
- Operating Voltage: 4.8V – 6V DC
- Output Current: 15mA (5.0V)
- Output Signal: 1.5ms ± 0.5ms
- Knob Diameter: 12mm
- Dimensions: 35×30×15mm (L×W×H)
- Weight: 8g
- Shipping Weight: 12g
- Shipping Dimensions: 6 × 4 × 3 cm
- Color: Blue
Add to cart
GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
0 out of 5
₹160
📌 Specifications

🔹 Operating Voltage: 4.8V – 6V DC
🔹 Output Current: 15mA (5.0V)
🔹 Output Signal: 1.5ms ± 0.5ms
🔹 Dimensions: 35mm x 30mm x 15mm
🔹 Knob Diameter: 12mm
🔹 Weight: 8g
🔹 Color: Blue

Add to cart
L298N Based Motor Driver Module for DIY Projects
0 out of 5
₹150
Specifications
- Operating Supply Voltage: Up to 46V
- Total DC Current: Up to 4A (2A per channel)
- Logic Voltage: 5V
- Drive Voltage: 5V – 35V
- Logic Current: 0-36mA
- Drive Current: 2A (max per bridge)
- Maximum Power: 25W
- Dimensions: 44 x 44 x 28 mm (LxWxH)
- Weight: 26g
Add to cart
Red 12MM 2PIN Self-Locking Round Plastic Push Button Switch
0 out of 5
₹20
Specifications:
- Self-locking/Latching Self-reset
- Good electrical conductivity
- This is Momentary type push-button switch
- Easy to use
- Light Weight
- Function: Momentary
Add to cart
Servo SG90 9g 180 Degree Motor for Arduino
0 out of 5
₹90
Specifications:
- Universal for JR and FP connector § Cable length: 25cm
- No load; Operating speed:
0.12 sec / 60 degree (4.8V),

0.10 sec / 60 degree (6.0V)
- Temperature: -30~60’C
- Dead band width: 5us
Add to cart
SimonK 30A BLDC ESC Electronic Speed Controller
0 out of 5
₹370
Specifications
- Operating Voltage: 2-3S LiPo Battery
- Current Rating: 30A Continuous, 40A Peak
- BEC Output: 5V/2A
- Start Modes: Normal, Soft, Super-Soft
- Compatibility: Fixed-wing aircraft, helicopters, multi-rotors
- Safety Features: Backward-polarity protection, 5V receiver line protection
- Heat Management: Heat sink with thermal membrane
- Programmability: Fully programmable via RC remote control
Add to cart
SPDT Slide Switch (Pack of 2)
0 out of 5
₹10
Specifications:
- Material: Plastic and Metal
- Voltage Max: 50V
- Current Max: 0.5A
- Positions: 2 (On/On)
- Terminal Pins: 3
- Contact Resistance: 20MΩ
Add to cart
Submersible Mini Water Pump 3-6V DC
0 out of 5
₹70
Specifications:
- Operating Voltage: 2.5 ~ 6V
- Operating Current: 130 ~ 220mA
- Flow Rate: 80 ~ 120 L/H
- Maximum Lift: 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
Add to cart
Tactile Push Button Switch 6x6x5mm
0 out of 5
₹5
Specifications:
- Ideal for Through-hole applications.
- Shaft Shape: Round
- High precision mechanism design.
- Compact and lightweight, easy to carry and dismantling.
- Good electrical conductivity.
- Dimensions: 6x6x5mm
- Shaft Shape: Round
Add to cart

TowerPro MG995 Metal Gear Servo Motor (180° Rotation)

0 out of 5

₹280

Specifications

Parameter	Value
Model	MG995
Weight	55g
Operating Voltage	4.8V – 7.2V
Torque @ 4.8V	10kg/cm
Torque @ 6.6V	12kg/cm
Operating Speed @ 4.8V	0.20 sec/60°
Operating Speed @ 6.6V	0.16 sec/60°
Rotational Angle	180° (±90°)
Dead Band Width	1 µs