Home – Big Electronics

DIY BOARDS
SENSORS
MODULES

WIDE RANGE OF

SHOP NOW

“7-Segment Display – Common Cathode (LT543) – High-Intensity LED Display” has been added to your cart. View cart

Showing 1–20 of 23 results

0.91 inch 128×32 Blue OLED Display Module with I2C/IIC Serial Interface
0 out of 5
₹180
Specifications:
- Driving IC: SSD1306
- Operating Voltage: 3.3-5V
- Resolution Ratio: 128 x 32
- Text Color: White
- Background Color: Black
Add to cart
0.96 Inch I2C/IIC 4pin OLED Display Module (Blue)
0 out of 5
₹170
Specifications:
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I²C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
- Dimension : 2 x 2 cm
Add to cart
5V DC TOY Motor DIY
0 out of 5
₹15
Specifications:
- Nominal Operating Voltage: 5V
- Operating Voltage Range: 3.0V to 6.0V
- Nominal Voltage: 3V
- No Load Current: 0.27A
- Maximum Current: 1.05A
- No Load Speed: 13,500 revolutions per minute (r/min)
- Maximum Speed: 10,740 revolutions per minute (r/min)
- Stall Torque: 68g.cm
- Maximum Torque: 14g.cm
- Stall Current: 4.10A
Add to cart
60 RPM BO Motor – (Single Shaft) Straight
0 out of 5
₹55
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Single D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kg/cm
Add to cart
65mm Robot Wheel for BO Motors (Yellow)
0 out of 5
₹18
Specifications:
- Loading Capacity (Kg): 2.5
- D hole For BO Motor: 6 mm
- Weight (gm): 34
- Wheel Diameter(mm): 65 mm
- ColorBlack (Tyre): Yellow (Rim)
- Wheel Width 27 mm
- Body Material Plastic
- Grip Material Rubber
- Center Shaft Hole Diameter
- 4mm-(round side) and 3.5mm-(flat side)
Add to cart

7-Segment Display – Common Cathode (LT543) – High-Intensity LED Display

0 out of 5

₹10

Specifications

Parameter	Details
Display Type	7-Segment LED Display
Configuration	Common Cathode
Color	Red
Digit Size	0.56 inches
Current Consumption	Low Power
Mounting Type	PCB Mounting
RoHS Compliant	Yes

Add to cart

Bank rate Display
0 out of 5
₹17,500
Specifications:
- Display Parameters: As required (16 to 18 parameters)
- Text Color: Red
- Dimensions: 14-inch x 14-inch cabinet
- Character Size: 40MM (1.7 inches)
- Mounting Type: Wall-mounted
- Country of Origin: India
Add to cart
BO Motor dual shaft 60 RPM – Straight
0 out of 5
₹55
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 150 RPM
- Rated Torque: 0.35 Kgcm
Add to cart
DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch
0 out of 5
₹100
Specifications:
- Working voltage: DC4.5V-35V
- Output: 0-5A 90W
- PWM duty cycle: 1% -100%
- PWM frequency: 20KHz
- Size: 30.5 * 26.5 * 13.5mm
Add to cart
GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
0 out of 5
₹160
Specifications
- Operating Voltage: 4.8V – 6V DC
- Output Current: 15mA (5.0V)
- Output Signal: 1.5ms ± 0.5ms
- Knob Diameter: 12mm
- Dimensions: 35×30×15mm (L×W×H)
- Weight: 8g
- Shipping Weight: 12g
- Shipping Dimensions: 6 × 4 × 3 cm
- Color: Blue
Add to cart
GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
0 out of 5
₹160
📌 Specifications

🔹 Operating Voltage: 4.8V – 6V DC
🔹 Output Current: 15mA (5.0V)
🔹 Output Signal: 1.5ms ± 0.5ms
🔹 Dimensions: 35mm x 30mm x 15mm
🔹 Knob Diameter: 12mm
🔹 Weight: 8g
🔹 Color: Blue

Add to cart
IIC/I2C Serial Interface Adapter Module
0 out of 5
₹190
Features:
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
Add to cart
L298N Based Motor Driver Module
0 out of 5
₹145
Specifications
- Operating Supply Voltage: Up to 46V
- Total DC Current: Up to 4A (2A per channel)
- Logic Voltage: 5V
- Drive Voltage: 5V – 35V
- Logic Current: 0-36mA
- Drive Current: 2A (max per bridge)
- Maximum Power: 25W
- Dimensions: 44 x 44 x 28 mm (LxWxH)
- Weight: 26g
Add to cart
LCD1602 LCD Display Yellow Backlight
0 out of 5
₹110
Specifications
- Display Mode: STN (Super Twisted Nematic)
- Model: LCD1602
- Character Format: 16 characters x 2 lines
- Font Style: 5×8 dots per character
- Power Supply: 5V ±10%
- Backlight: Yellow
- Dimensions: 80 x 36 x 10 (LxWxH) mm
Add to cart
MAX7219 LED Dot Matrix
0 out of 5
₹230
Specifications
- Power Supply: 5V (via VCC pin)
- Input/Output Control: Serial input/output
- Driver Chip: MAX7219
- LED Configuration: Supports 8×8 matrix or 8-digit 7-segment displays.
- Input Current: 320 mA
- PCB Dimensions: 50×32 mm (LxW)
Add to cart
MAX7219 LED Dot Matrix 4-in-1 Display Module
0 out of 5
₹490
Specifications
- Driver IC: MAX7219
- Input Voltage: 5V
- Maximum Operating Current: 320mA
- LED Color: Red
- LED Matrix Dimensions: 32×32×6mm (L×W×H)
- PCB Size: 128×32mm (L×W)
- Communication Interface: Serial (SPI-like protocol)
Add to cart

Original Chip A4988 Stepper Motor Driver (Red) with Heatsink – 1.5A

0 out of 5

₹92

Specifications

Parameter	Value
Supply Voltage	8V – 35V
Operating Current (Without Heatsink)	1A per phase
Maximum Current (With Heatsink)	2A per phase
Logic Voltage Input	3V – 5.5V
Step Modes	Full, ½, ¼, ⅛, 1/16
Protection Features	Thermal shutdown, UVLO, short circuit protection
Additional Cooling	Required for operation above 1A

Add to cart

Servo SG90 9g 180 Degree
0 out of 5
₹92
Specifications:
- Universal for JR and FP connector § Cable length: 25cm
- No load; Operating speed:
0.12 sec / 60 degree (4.8V),

0.10 sec / 60 degree (6.0V)
- Temperature: -30~60’C
- Dead band width: 5us
Add to cart
SimonK 30A BLDC ESC Electronic Speed Controller
0 out of 5
₹370
Specifications
- Operating Voltage: 2-3S LiPo Battery
- Current Rating: 30A Continuous, 40A Peak
- BEC Output: 5V/2A
- Start Modes: Normal, Soft, Super-Soft
- Compatibility: Fixed-wing aircraft, helicopters, multi-rotors
- Safety Features: Backward-polarity protection, 5V receiver line protection
- Heat Management: Heat sink with thermal membrane
- Programmability: Fully programmable via RC remote control
Add to cart
Submersible Mini Water Pump 3-6V DC
0 out of 5
₹50
Specifications:
- Operating Voltage: 2.5 ~ 6V
- Operating Current: 130 ~ 220mA
- Flow Rate: 80 ~ 120 L/H
- Maximum Lift: 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
Add to cart