“2-Channel Logic Level Converter – 3.3V to 5V TTL Bi-Directional” has been added to your cart.
View cart
Showing 1–20 of 62 results
Add to wishlist Compare Quick view
₹ 65
Specifications :
Operating Voltage : 4.5V-30V DC (Best performance: 5V-24V DC)
Measurement Range : 0-100V DC
Accuracy : ±0.1V
Current Consumption : <40mA
Refresh Speed : Approx. 200ms/time
Minimum Display Voltage : 3V (Accuracy improves above 3.6V)
LED Color : Red
Add to wishlist Compare Quick view
₹ 180
Specifications:
Driving IC: SSD1306
Operating Voltage: 3.3-5V
Resolution Ratio: 128 x 32
Text Color: White
Background Color: Black
₹ 260 Original price was: ₹260. ₹ 255Current price is: ₹255.
Features:
Operating Voltage 5V
Max Current: 20mA
Relay Contact Current Capacity at AC250V: 10A.
Relay Contact Current Capacity at DC5V: 10A
Power supply indicator lamp
Control indicator lamp
Add to wishlist Compare Quick view
₹ 360
Specifications
Parameter
Details
Operating Voltage
24V DC
Current Consumption
0.8A
Power Rating
7.5W
Body Material
High-Quality Iron
Locking Mechanism
Electromagnetic Suction
Mounting
Open-Frame Type with Mounting Board
Application Areas
Doors, cabinets, lockers, vending machines, storage units, etc.
Add to wishlist Compare Quick view
₹ 140
Specifications
Parameter
Details
Operating Voltage
12V DC
Current Capacity
3A
Function
White-Warm Two-Color Infinite Dimming
Output Line
3 Wires (150mm Length)
Input Line
2 Wires (300mm Length)
Size
36mm x 33mm x 7mm
Add to wishlist Compare Quick view
₹ 6
Specifications:
Connector Type: JST-VH (Relimate)
Variant: Male
Number of Pin: 2
Pitch: 2.54
Wire length: 15mm
Add to wishlist Compare Quick view
₹ 70
Technical Specifications
Specification
Details
Voltage Levels
Converts between 5V↔3.3V or 2.8V↔1.8V
Number of Channels
2
Compatibility
Arduino, Raspberry Pi, STM32, ESP8266, ESP32
Module Dimensions
15mm x 15mm x 2mm
Weight
1.02g
Power Supply Pins
HV (High Voltage), LV (Low Voltage), GND (Ground)
Add to wishlist Compare Quick view
₹ 40
Specifications:
Material: Ceramic and Wire
Diameter:
Atomizer: 2cm / 0.79in
Sealing Ring: 2.5cm / 0.98in
Operating Frequency: 2.4MHz (Electronic High-Frequency Oscillation)
Add to wishlist Compare Quick view
₹ 9
Specifications:
Connector Type: JST-VH (Relimate)
Variant: Male
Number of Pins: 3
Pitch: 2.54mm
Add to wishlist Compare Quick view
₹ 12
Specifications:
Connector Type: JST-VH
Number of Pin: 4
Variant: Female
Pitch: 2.54mm
Wire Length: 25cm
Add to wishlist Compare Quick view
₹ 50
Specifications
Parameter
Details
Operating Voltage
3.3V – 5V
Temperature Range
-25°C to +80°C
Output Type
Analog & Digital (DO: High/Low)
Voltage Comparator
LM393
Dimensions
37mm × 14mm × 7mm
Weight
4g
Add to wishlist Compare Quick view
₹ 70
Specifications:
Matrix: 4×4 Matrix Membrane Keypad
Connector: 8-pin connector
Mounting: Adhesive mounting with sticker on the back side
Operating Temperature: 0 to 60 degrees Celsius
Humidity: 40 degrees Celsius, 90%-95% (240 hours)
Flexible Circuit Length: Approximately 3.3 inches (83 mm)
₹ 240 Original price was: ₹240. ₹ 230Current price is: ₹230.
Features:
Maximum switching voltage: 250VAC / 30VDC
Maximum switching current: 10A
Each relay features an LED indicator.
Dimensions: 51 x 39 x 18mm (Length x Width x Height)
₹ 199 Original price was: ₹199. ₹ 160Current price is: ₹160.
Features:
5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
Equipped with high-current relay, AC250V 10A; DC30V 10A.
Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Indication LED’s for Relay output status.
Add to wishlist Compare Quick view
₹ 150
Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -20A ~ 20A
Sensitivity: 100mV/A
Add to wishlist Compare Quick view
₹ 600
Specifications
Parameter
Details
Measurement Range
±3g
Interface Type
Analog Output
Operating Voltage
3V – 5V
Operating Temperature
-40°C to +85°C
Module Dimensions
1.5 cm × 1.5 cm × 1.1 cm
Weight
5g
Built-in Logic Converter
Yes (for I2C Communication)
Add to wishlist Compare Quick view
₹ 70
Specifications
Parameter
Details
Operating Voltage
5V
Interface
2.54mm pin leads
Potentiometer Resistance
10kΩ
Output Type
Analog signals (X and Y axes)
Switch
Built-in pressable switch
Compatibility
Arduino, Raspberry Pi, and other microcontrollers
Add to wishlist Compare Quick view
₹ 900
The AS608 Optical Fingerprint Sensor Module is a high-performance fingerprint recognition module that integrates image collection and processing algorithms in one compact unit. It supports fingerprint registration, 1:1 comparison, and 1:N searching, making it ideal for security systems, biometric authentication, and embedded applications. Features ✔ All-in-One Integrated Module – Includes both image collection and fingerprint…
Add to wishlist Compare Quick view
₹ 900
Specifications
Parameter
Details
Resolution
500 dpi
Fingerprint Entry Time
< 1.0 second
Window Area
15.3 × 18.2 mm
Interface
USB / UART
Power Consumption
Low power usage
Fingerprint Storage
Supports multiple fingerprints
Application
Biometric security, access control, attendance systems, and embedded development
Add to wishlist Compare Quick view
₹ 105
Specifications:
🔹 Operating Voltage: 1.8V – 3.6V DC
🔹 Pressure Range: 300 hPa to 1100 hPa (altitude 9000m to -500m)
🔹 Accuracy: ±1 hPa (Pressure), ±0.5°C (Temperature)
🔹 Resolution: 0.01 hPa (Pressure), 0.1°C (Temperature)
🔹 Interface: I2C (default) & SPI
🔹 Operating Temperature Range: -40°C to +85°C
🔹 Low power consumption: 5µA in standard mode
🔹 Dimensions: 21mm x 18mm
End of content
End of content
Load more