DIY BOARDS
SENSORS
MODULES WIDE RANGE OF SHOP NOW

Showing 1–20 of 28 results

  • 5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable

    5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable

    0 out of 5
    ₹210

    QUICK OVERVIEW:

    1. Resolution: 5 MP
    2. Interface Type: CSI(Camera Serial Interface)
    3. Dimensions: 25x23x8 (LxWxH) mm
    4. Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
    5. Fully Compatible with Raspberry Pi 3 and 4 Model B
    6. Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
    Add to cartDone
  • Arduino Joystick Module – Dual Axis with Push Button

    Arduino Joystick Module – Dual Axis with Push Button

    0 out of 5
    ₹70

    Specifications

    Parameter Details
    Operating Voltage 5V
    Interface 2.54mm pin leads
    Potentiometer Resistance 10kΩ
    Output Type Analog signals (X and Y axes)
    Switch Built-in pressable switch
    Compatibility Arduino, Raspberry Pi, and other microcontrollers
    Add to cartDone
  • Arduino Mega 2560 R3 – High-Performance Microcontroller Board

    Arduino Mega 2560 R3 – High-Performance Microcontroller Board

    0 out of 5
    ₹1,600

    Technical Specifications

    Specification Details
    Microcontroller ATmega2560
    Operating Voltage 5V
    Input Voltage (Recommended) 7-12V
    Input Voltage (Limits) 6-20V
    Digital I/O Pins 54 (15 PWM)
    Analog Input Pins 16
    DC Current per I/O Pin 40mA
    DC Current for 3.3V Pin 50mA
    Flash Memory 256KB (8KB used by bootloader)
    SRAM 8KB
    EEPROM 4KB
    Clock Speed 16 MHz
    USB Host Chip MAX3421E
    Dimensions (LxWxH) 101.98mm x 53.63mm x 15.29mm
    Weight 35g
    Add to cartDone
  • Arduino Nano Board R3 CH340 chip

    Arduino Nano Board R3 CH340 chip

    0 out of 5
    ₹240

    Specifications:

    • Operating Voltage (logic level): 5V
    • 8 analog inputs ports: A0 ~ A7
    • 14 Digital input / output ports: TX, RX, D2 ~ D13
    • 1 pair of TTL level serial transceiver ports RX / TX
    • Using Atmel Atmega328P-AU MCU
    • There is a bootloader installed in it
    • Standard 0.1” spacing DIP (breadboard friendly).
    • Manual reset switch.
    Add to cartDone
  • ARDUINO UNO Development Board DIP

    ARDUINO UNO Development Board DIP

    5.00 out of 5
    ₹490

    Specifications:

    • Microcontroller ATmega328 DIP – Interface CH340G
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Digital I / O Pins 14
    • PWM output PINS: 6
    • Analog Input Pins: 6
    Add to cartDone
  • ATmega328P-U Microcontroller – 8-bit MCU for Embedded Systems & IoT

    ATmega328P-U Microcontroller – 8-bit MCU for Embedded Systems & IoT

    0 out of 5
    ₹390

    Specifications:

    Specification Details
    Microcontroller Type 8-bit ATmega328P
    I/O Pins 23
    Timers 3 (8-bit/16-bit)
    Clock Frequency Up to 20 MHz
    Program Memory 32KB Flash
    RAM 2KB SRAM
    EEPROM 1024 Bytes
    Interfaces I2C, SPI, USART
    Operating Voltage 2.7V – 5.5V
    Temperature Range -24°C to 84°C
    Dimensions (LxWxH) 34.8 x 7.5 x 4.57 mm
    Package Type Through-Hole (DIP)
    Add to cartDone
  • Bank rate Display

    Bank rate Display

    0 out of 5
    ₹17,500

    Specifications:

    • Display Parameters: As required (16 to 18 parameters)
    • Text Color: Red
    • Dimensions: 14-inch x 14-inch cabinet
    • Character Size: 40MM (1.7 inches)
    • Mounting Type: Wall-mounted
    • Country of Origin: India
    Add to cartDone
  • Cricket Scoreboard

    Cricket Scoreboard

    0 out of 5
    ₹27,000

    Ideal  for:

    • Professional cricket leagues and tournaments
    • Community cricket events
    • Schools, colleges, and sports academies
    Add to cartDone
  • Digispark ATTINY85 USB Development Board

    Digispark ATTINY85 USB Development Board

    0 out of 5
    ₹250

    Specifications:

    • Microcontroller: ATtiny85
    • Interface: USB
    • Development Environment: Arduino IDE
    • I/O Pins: 6 (digital, analog, PWM configurable)
    • PWM Outputs: 3 (expandable via software PWM)
    • Analog Inputs: 4
    • Communication: I2C, SPI (via USI)
    • Power Supply: USB or 6V – 35V DC
    • Onboard Regulator: 150mA, 5V
    • Size: Ultra-compact for space-constrained projects
    Add to cartDone
  • ECG Module AD8232 Heart ECG Monitoring Sensor Kit for Arduino

    ECG Module AD8232 Heart ECG Monitoring Sensor Kit for Arduino

    0 out of 5
    ₹690

    Specifications

    Parameter Value
    Operating Voltage 3.3V DC
    Analog Output Yes
    Temperature Range -40°C to 90°C
    Cable Length 50 cm
    Board Dimensions 36mm x 30mm x 18mm
    Weight 5g
    Connector Type 3.5mm Jack for ECG pads
    Add to cartDone
  • Electronic Customized Projects and PCB Design

    Electronic Customized Projects and PCB Design

    0 out of 5
    ₹199

    Innovate with Big Electronics and Automation: Turning Your Ideas into Reality At Big Electronics and Automation, we specialize in transforming ideas into reality. With a strong focus on market trends and customer needs, we provide innovative solutions for a wide range of electronics projects. Whether you’re tackling simple circuits or advanced IoT and MCU-based systems,…

    Add to cartDone
  • ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    0 out of 5
    ₹120

    Specifications

    • Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
    • Protocol Stack: Integrated TCP/IP
    • Processor: Low-power 32-bit CPU
    • Communication Interfaces: SDIO 1.1/2.0, SPI, UART
    • Wireless Technologies: STBC, 1×1 MIMO, 2×1 MIMO
    • Flash Memory: 1MB (upgraded from 512KB)
    • GPIO Pins: 2 (for sensors and peripherals)
    • Wake-up Time: <2ms
    • Standby Power Consumption: <1.0mW (DTIM3)
    • Operating Voltage: 3.3V (requires logic level converter for 5V systems)
    • Compatibility: Arduino, Raspberry Pi, PIC, and other microcontrollers
    • Dimensions: Compact form factor
    Read moreDone
  • ESP-12E ESP8266 Serial Port WiFi Wireless Transceiver Module

    ESP-12E ESP8266 Serial Port WiFi Wireless Transceiver Module

    0 out of 5
    ₹220

    Specifications:

    • Wireless Standards: 802.11 b/g/n
    • Frequency Range: 2.4GHz – 2.5GHz
    • Data Interfaces: UART, HSPI, I2C, I2S, GPIO, PWM, IR Remote Control
    • Operating Voltage: 3.0V – 3.6V (Recommended: 3.3V)
    • Average Current Consumption: 80mA
    • Operating Temperature: -40°C to 125°C

    PCB Size: 25mm × 16mm

    Read moreDone
  • ESP32 38Pin Development Board WiFi+Bluetooth

    ESP32 38Pin Development Board WiFi+Bluetooth

    0 out of 5
    ₹400

    Specifications:

    • 4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
    • Ultra-Low power consumption works perfectly with the IDE
    • Support LWIP protocol, Freertos
    • Support Three Modes: AP, STA, and AP+STA
    • ESP 32 is safe, reliable, and scalable to a variety of applications
    Add to cartDone
  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization

    ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization

    0 out of 5
    ₹840

    Specifications:

    • Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
    • Low-Power Dual-core 32-bit CPU for application processors
    • Up to 240MHz, up to 600 DMIPS
    • Built-in 520 KB SRAM, external 4M PSRAM
    • Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
    • Support OV2640 and OV7670 cameras with built-in flash
    • Support for images Wi-Fi upload
    • Support TF card
    Buy ProductDone
  • Gold Rate Display

    Gold Rate Display

    0 out of 5
    ₹8,000

    Specifications:

    • Display Digits: 5 digits
    • Text Color: Red
    • Parameters Displayed: 24ct, 22ct, 20ct, 18ct gold rates, and silver rate.
    • Connectivity: Wireless Mobile App
    • Country of Origin: India
    Add to cartDone
  • Industrial Timers

    Industrial Timers

    0 out of 5
    ₹9,000

    Specifications:

    • Display Time: Customizable up to 1 hour
    • Text Color: Red
    • Character Size: 16 cm (6 inches)
    • Sound Type: Mono beep/buzzer
    • Connectivity Options: Wired/Wireless Mobile App
    • Mounting Type: Wall-mounted
    • Usage Applications: Industries, factories
    • Country of Origin: India
    Add to cartDone
  • Kabaddi Scoreboard

    Kabaddi Scoreboard

    0 out of 5
    ₹25,000

    Kabaddi Digital LED Scoreboard by Big Electronics and Automation Enhance the excitement of Kabaddi matches with the state-of-the-art Kabaddi Digital LED Scoreboard by Big Electronics and Automation. Designed to elevate the viewing experience, this scoreboard combines functionality, modern technology, and style. Kabaddi Scoreboard GAMES USE Kabaddi Shape Rectangle Mounting Type Hanging and Free Stand Brand…

    Add to cartDone
  • Led Standee

    Led Standee

    0 out of 5
    ₹32,000

    Key Features of LED Standee:

    • Customizable Content: Update visuals, text, or videos in real-time.
    • Interactive Display: Ideal for product presentations and demonstrations.
    • Compact and Lightweight: Easy to move and install at any location.
    • Durability: Built with high-quality materials to ensure a long lifespan.
    • Eco-Friendly: Saves energy and eliminates paper waste.
    Add to cartDone
  • Multi Colour Displays/Scrolling Displays

    Multi Colour Displays/Scrolling Displays

    0 out of 5
    ₹5,000

    Specifications:

    • Pitch: P10
    • Colour Options: Multicolour.
    • Size: Customizable
    • Applications: Advertising Boards, Information Boards
    • Usage: Outdoor Advertisements, Hanging, Wall Mounting
    • Communication: Wi-Fi Mobile/PC App
    • Installation Type: Wall Mount, Hanging, Standee
    • Material: MS (Mild Steel)
    • Display Function: Text, 3D Animation
    • Waterproof: Yes
    • Brand: BIG ELECTRONICS
    Add to cartDone

End of content

End of content