Add to wishlist Compare Quick view
₹ 65Specifications :
Operating Voltage : 4.5V-30V DC (Best performance: 5V-24V DC)Measurement Range : 0-100V DCAccuracy : ±0.1VCurrent Consumption : <40mARefresh Speed : Approx. 200ms/timeMinimum Display Voltage : 3V (Accuracy improves above 3.6V)LED Color : Red
Add to wishlist Compare Quick view
₹ 180Specifications:
Driving IC: SSD1306
Operating Voltage: 3.3-5V
Resolution Ratio: 128 x 32
Text Color: White
Background Color: Black
Add to wishlist Compare Quick view
₹ 170Specifications:
Display size: 0.96″
Resolution radio:128 x 64
Interface modes: I2 C/IIC
Working voltage: 3.3V
Control Chip: SSD1306
Dimension : 2 x 2 cm
Add to wishlist Compare Quick view
₹ 75Specifications:
Model No.: ICR18650-22C
Capacity (mAh): 2200
Output Voltage: 3.7V
Charge Rate: 3C
High energy density
High working voltage for single battery cells.
Pollution-free
Long cycle life
Add to wishlist Compare Quick view
₹ 70Technical Specifications
Specification Details
Voltage Levels Converts between 5V↔3.3V or 2.8V↔1.8V
Number of Channels 2
Compatibility Arduino, Raspberry Pi, STM32, ESP8266, ESP32
Module Dimensions 15mm x 15mm x 2mm
Weight 1.02g
Power Supply Pins HV (High Voltage), LV (Low Voltage), GND (Ground)
Add to wishlist Compare Quick view
₹ 80Specifications:
Over Charge Voltage Range: 4.25-4.35 V + 0.05 V
Over Voltage Range: 2.5-3.0 V + 0.05 V
Max. Operating Current: 13 A
Max. Limiting Current: 20 A
Charging Voltage: 8.4-9 V
Add to wishlist Compare Quick view
₹ 80Specifications:
Operating Current: 6-8ACurrent Limit: 10-13AStorage Temperature: -40°C to +80°CResting Current: < 30µAEffective Lifetime: Over 30,000 hoursInternal Resistance: < 100mΩShort-Circuit Protection: YesSelf-Recovery Delay: Yes
Add to wishlist Compare Quick view
₹ 10Specifications
Parameter Details
Display Type 7-Segment LED Display
Configuration Common Cathode
Color Red
Digit Size 0.56 inches
Current Consumption Low Power
Mounting Type PCB Mounting
RoHS Compliant Yes
Add to wishlist Compare Quick view
₹ 5Specifications:
It is an environmental 9V battery buckle.
Contacts Material: Brass, nickel-plated.Wire Material: PVC-insulated copper.Wire Ends: Stripped for easy connection.Wire Length: 10cm.
Color: Blue.
Add to wishlist Compare Quick view
₹ 22Specifications:
Constant 9V Output till lasts
Metal Jacket Body
Good Built Quality and hence Leakproof
Easy to install and Replace
Corrosion free Connector Point for long-term use
0% Mercury and Cadmium. Environment-friendly
OEM Compatible.
Add to wishlist Compare Quick view
₹ 17,500Specifications:
Display Parameters: As required (16 to 18 parameters)Text Color: RedDimensions: 14-inch x 14-inch cabinetCharacter Size: 40MM (1.7 inches)Mounting Type: Wall-mountedCountry of Origin: India
Add to wishlist Compare Quick view
₹ 190Features:
5V power supply.
Serial I2C control of LCD display using PCF8574.
Backlight can be enabled or disabled via a jumper on the board.
Contrast control via a potentiometer.
Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
Add to wishlist Compare Quick view
₹ 110Specifications
Display Mode: STN (Super Twisted Nematic)Model: LCD1602Character Format: 16 characters x 2 linesFont Style: 5×8 dots per characterPower Supply: 5V ±10%Backlight : YellowDimensions: 80 x 36 x 10 (LxWxH) mm
Add to wishlist Compare Quick view
₹ 230Specifications
Power Supply: 5V (via VCC pin)Input/Output Control: Serial input/outputDriver Chip: MAX7219LED Configuration: Supports 8×8 matrix or 8-digit 7-segment displays.Input Current: 320 mA
PCB Dimensions: 50×32 mm (LxW)
Add to wishlist Compare Quick view
₹ 490Specifications
Driver IC: MAX7219Input Voltage: 5VMaximum Operating Current: 320mALED Color: RedLED Matrix Dimensions: 32×32×6mm (L×W×H)PCB Size: 128×32mm (L×W)Communication Interface: Serial (SPI-like protocol)
Add to wishlist Compare Quick view
₹ 90Specifications:
Driver Chip: TM1637Input Voltage: 3.7V – 5.3VInput Current: 30mADisplay Type: 7-Segment LEDDigit Count: 4LED Color: RedControl Interface: I2C-compatible (DIO & CLK)Pinout: GND, VCC, DIO, CLKMounting Holes: 4 × M2 screw positioning holesModule Dimensions: 42mm × 24mm × 12mm
Add to wishlist Compare Quick view
₹ 6,500Specifications:
Display Digits: 3 digits (000 to 999)Text Color: RedCharacter Size: 16 cm (6 inches)Connectivity Options: Wired/Wireless Mobile App/IoTMounting Type: Wall-mountedUsage Applications: Hospitals, canteens, service centers, banks, etc.Country of Origin: India
Add to wishlist Compare Quick view
₹ 32Specifications:
Input voltage : 4.5V ~ 5.5V
Input Interface: Micro USB port
Charging method: linear charge
A full charge voltage: 4.2V
Power: 4.2 w
Charging accuracy: 1.5%
Operating Temperature: -10 to +85º C
Charging indicator: LED indicators for charging and full charging.
₹ 110Original price was: ₹110. ₹ 90Current price is: ₹90. Specifications:
Input voltage: 3-40V
Output voltage: 1.5-35V(Adjustable)
Output current: Rated current is 2A, maximum 3A
Switching Frequency: 150KHz
Operating temperature : Industrial grade (-40 to +85 )
Conversion efficiency: 92%(highest)
End of content
End of content
XL6009 DC-DC Adjustable Step-Up Boost Power Converter Module
1 × ₹90 
LM393 Sound Detection Sensor Module
1 × ₹50 
