Showing 1–20 of 22 results
Add to wishlist Compare Quick view
₹ 65Specifications :
Operating Voltage : 4.5V-30V DC (Best performance: 5V-24V DC)Measurement Range : 0-100V DCAccuracy : ±0.1VCurrent Consumption : <40mARefresh Speed : Approx. 200ms/timeMinimum Display Voltage : 3V (Accuracy improves above 3.6V)LED Color : Red
Add to wishlist Compare Quick view
₹ 75Specifications:
Model No.: ICR18650-22C
Capacity (mAh): 2200
Output Voltage: 3.7V
Charge Rate: 3C
High energy density
High working voltage for single battery cells.
Pollution-free
Long cycle life
Add to wishlist Compare Quick view
₹ 70Technical Specifications
Specification Details
Voltage Levels Converts between 5V↔3.3V or 2.8V↔1.8V
Number of Channels 2
Compatibility Arduino, Raspberry Pi, STM32, ESP8266, ESP32
Module Dimensions 15mm x 15mm x 2mm
Weight 1.02g
Power Supply Pins HV (High Voltage), LV (Low Voltage), GND (Ground)
Add to wishlist Compare Quick view
₹ 80Specifications:
Over Charge Voltage Range: 4.25-4.35 V + 0.05 V
Over Voltage Range: 2.5-3.0 V + 0.05 V
Max. Operating Current: 13 A
Max. Limiting Current: 20 A
Charging Voltage: 8.4-9 V
Add to wishlist Compare Quick view
₹ 80Specifications:
Operating Current: 6-8ACurrent Limit: 10-13AStorage Temperature: -40°C to +80°CResting Current: < 30µAEffective Lifetime: Over 30,000 hoursInternal Resistance: < 100mΩShort-Circuit Protection: YesSelf-Recovery Delay: Yes
Add to wishlist Compare Quick view
₹ 15Specifications:
Nominal Operating Voltage: 5V
Operating Voltage Range: 3.0V to 6.0V
Nominal Voltage: 3V
No Load Current: 0.27A
Maximum Current: 1.05A
No Load Speed: 13,500 revolutions per minute (r/min)
Maximum Speed: 10,740 revolutions per minute (r/min)
Stall Torque: 68g.cm
Maximum Torque: 14g.cm
Stall Current: 4.10A
Add to wishlist Compare Quick view
₹ 55Specifications:
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Single D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 60 RPM
Rated Torque: 1 Kg/cm
Add to wishlist Compare Quick view
₹ 18Specifications:
Loading Capacity (Kg): 2.5
D hole For BO Motor: 6 mm
Weight (gm): 34
Wheel Diameter(mm): 65 mm
ColorBlack (Tyre): Yellow (Rim)
Wheel Width 27 mm
Body Material Plastic
Grip Material Rubber
Center Shaft Hole Diameter
4mm-(round side) and 3.5mm-(flat side)
Add to wishlist Compare Quick view
₹ 5Specifications:
It is an environmental 9V battery buckle.
Contacts Material: Brass, nickel-plated.Wire Material: PVC-insulated copper.Wire Ends: Stripped for easy connection.Wire Length: 10cm.
Color: Blue.
Add to wishlist Compare Quick view
₹ 22Specifications:
Constant 9V Output till lasts
Metal Jacket Body
Good Built Quality and hence Leakproof
Easy to install and Replace
Corrosion free Connector Point for long-term use
0% Mercury and Cadmium. Environment-friendly
OEM Compatible.
Add to wishlist Compare Quick view
₹ 55Specifications:
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Double D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 150 RPM
Rated Torque: 0.35 Kgcm
Add to wishlist Compare Quick view
₹ 100Specifications:
Working voltage: DC4.5V-35V
Output: 0-5A 90W
PWM duty cycle: 1% -100%
PWM frequency: 20KHz
Size: 30.5 * 26.5 * 13.5mm
Add to wishlist Compare Quick view
₹ 160Specifications
Operating Voltage: 4.8V – 6V DCOutput Current: 15mA (5.0V)Output Signal: 1.5ms ± 0.5msKnob Diameter: 12mmDimensions: 35×30×15mm (L×W×H)Weight: 8gShipping Weight: 12gShipping Dimensions: 6 × 4 × 3 cmColor: Blue
Add to wishlist Compare Quick view
₹ 160📌 Specifications
🔹 Operating Voltage: 4.8V – 6V DCOutput Current: 15mA (5.0V)Output Signal: 1.5ms ± 0.5msDimensions: 35mm x 30mm x 15mmKnob Diameter: 12mmWeight: 8gColor: Blue
Add to wishlist Compare Quick view
₹ 145Specifications
Operating Supply Voltage: Up to 46VTotal DC Current: Up to 4A (2A per channel)Logic Voltage: 5VDrive Voltage: 5V – 35VLogic Current: 0-36mADrive Current: 2A (max per bridge)Maximum Power: 25WDimensions: 44 x 44 x 28 mm (LxWxH)Weight: 26g
Add to wishlist Compare Quick view
₹ 92Specifications
Parameter Value
Supply Voltage 8V – 35V
Operating Current (Without Heatsink) 1A per phase
Maximum Current (With Heatsink) 2A per phase
Logic Voltage Input 3V – 5.5V
Step Modes Full, ½, ¼, ⅛, 1/16
Protection Features Thermal shutdown, UVLO, short circuit protection
Additional Cooling Required for operation above 1A
Add to wishlist Compare Quick view
₹ 92Specifications:
Universal for JR and FP connector § Cable length: 25cm
No load; Operating speed:
0.12 sec / 60 degree (4.8V),
0.10 sec / 60 degree (6.0V)
Temperature: -30~60’C
Dead band width: 5us
Add to wishlist Compare Quick view
₹ 370Specifications
Operating Voltage: 2-3S LiPo BatteryCurrent Rating: 30A Continuous, 40A PeakBEC Output: 5V/2AStart Modes: Normal, Soft, Super-SoftCompatibility: Fixed-wing aircraft, helicopters, multi-rotorsSafety Features: Backward-polarity protection, 5V receiver line protectionHeat Management: Heat sink with thermal membraneProgrammability: Fully programmable via RC remote control
Add to wishlist Compare Quick view
₹ 50Specifications:
Operating Voltage: 2.5 ~ 6V
Operating Current: 130 ~ 220mA
Flow Rate: 80 ~ 120 L/H
Maximum Lift: 40 ~ 110 mm
Outlet Outside Diameter: 7.5 mm
Outlet Inside Diameter: 5 mm
Add to wishlist Compare Quick view
₹ 285Specifications
Parameter Value
Model MG995
Weight 55g
Operating Voltage 4.8V – 7.2V
Torque @ 4.8V 10kg/cm
Torque @ 6.6V 12kg/cm
Operating Speed @ 4.8V 0.20 sec/60°
Operating Speed @ 6.6V 0.16 sec/60°
Rotational Angle 180° (±90°)
Dead Band Width 1 µs
End of content
End of content
Load more
DC-DC Boost Module 
1 Channel relay board