DIY BOARDS
SENSORS
MODULES WIDE RANGE OF SHOP NOW

Showing 1–20 of 64 results

  • 0.91 inch 128×32 Blue OLED Display Module with I2C/IIC Serial Interface

    0.91 inch 128×32 Blue OLED Display Module with I2C/IIC Serial Interface

    0 out of 5
    ₹180

    Specifications:

    • Driving IC: SSD1306
    • Operating Voltage: 3.3-5V
    • Resolution Ratio: 128 x 32
    • Text Color: White
    • Background Color: Black
    Add to cartDone
  • Product on sale
    1 Channel relay board
    DAYS
    HRS
    MIN
    SEC

    1 Channel relay board

    0 out of 5
    Original price was: ₹260.Current price is: ₹255.

    Features:

    • Operating Voltage 5V
    • Max Current: 20mA
    • Relay Contact Current Capacity at AC250V: 10A.
    • Relay Contact Current Capacity at DC5V: 10A
    • Power supply indicator lamp
    • Control indicator lamp

     

    Add to cartDone
  • 1240 24V Solenoid Door Lock – Secure & Reliable Electronic Locking Solution

    1240 24V Solenoid Door Lock – Secure & Reliable Electronic Locking Solution

    0 out of 5
    ₹360

    Specifications

    Parameter Details
    Operating Voltage 24V DC
    Current Consumption 0.8A
    Power Rating 7.5W
    Body Material High-Quality Iron
    Locking Mechanism Electromagnetic Suction
    Mounting Open-Frame Type with Mounting Board
    Application Areas Doors, cabinets, lockers, vending machines, storage units, etc.
    Add to cartDone
  • 12V 3A Touch Sensor Switch for Mirror Light

    12V 3A Touch Sensor Switch for Mirror Light

    0 out of 5
    ₹140

    Specifications

    Parameter Details
    Operating Voltage 12V DC
    Current Capacity 3A
    Function White-Warm Two-Color Infinite Dimming
    Output Line 3 Wires (150mm Length)
    Input Line 2 Wires (300mm Length)
    Size 36mm x 33mm x 7mm
    Add to cartDone
  • 2-Channel Logic Level Converter – 3.3V to 5V TTL Bi-Directional

    2-Channel Logic Level Converter – 3.3V to 5V TTL Bi-Directional

    0 out of 5
    ₹70

    Technical Specifications

    Specification Details
    Voltage Levels Converts between 5V↔3.3V or 2.8V↔1.8V
    Number of Channels 2
    Compatibility Arduino, Raspberry Pi, STM32, ESP8266, ESP32
    Module Dimensions 15mm x 15mm x 2mm
    Weight 1.02g
    Power Supply Pins HV (High Voltage), LV (Low Voltage), GND (Ground)
    Add to cartDone
  • 20mm 2.4mhz piezoelectric humidifier, energy conversion plate

    20mm 2.4mhz piezoelectric humidifier, energy conversion plate

    0 out of 5
    ₹40

    Specifications:

    • Material: Ceramic and Wire
    • Diameter:
      • Atomizer: 2cm / 0.79in
      • Sealing Ring: 2.5cm / 0.98in
    • Operating Frequency: 2.4MHz (Electronic High-Frequency Oscillation)
    Add to cartDone
  • 4-Pin NTC Thermistor Temperature Sensor Module

    4-Pin NTC Thermistor Temperature Sensor Module

    0 out of 5
    ₹50

    Specifications

    Parameter Details
    Operating Voltage 3.3V – 5V
    Temperature Range -25°C to +80°C
    Output Type Analog & Digital (DO: High/Low)
    Voltage Comparator LM393
    Dimensions 37mm × 14mm × 7mm
    Weight 4g
    Add to cartDone
  • 4×4 Matrix Keypad Membrane Switch

    4×4 Matrix Keypad Membrane Switch

    0 out of 5
    ₹70

    Specifications:

    • Matrix: 4×4 Matrix Membrane Keypad
    • Connector: 8-pin connector
    • Mounting: Adhesive mounting with sticker on the back side
    • Operating Temperature: 0 to 60 degrees Celsius
    • Humidity: 40 degrees Celsius, 90%-95% (240 hours)
    • Flexible Circuit Length: Approximately 3.3 inches (83 mm)
    Add to cartDone
  • Product on sale
    5V 2 Channel Relay Module

    5V 2 Channel Relay Module

    0 out of 5
    Original price was: ₹240.Current price is: ₹230.

    Features:

    • Maximum switching voltage: 250VAC / 30VDC
    • Maximum switching current: 10A
    • Each relay features an LED indicator.
    • Dimensions: 51 x 39 x 18mm (Length x Width x Height)
    Add to cartDone
  • Product on sale
    5V 4 Channel Relay Module

    5V 4 Channel Relay Module

    0 out of 5
    Original price was: ₹199.Current price is: ₹160.

    Features:

    • 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
    • Equipped with high-current relay, AC250V 10A; DC30V 10A.
    • Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
    • Indication LED’s for Relay output status.
    Add to cartDone
  • 5V DC TOY Motor DIY

    5V DC TOY Motor DIY

    0 out of 5
    ₹15

    Specifications:

    • Nominal Operating Voltage: 5V
    • Operating Voltage Range: 3.0V to 6.0V
    • Nominal Voltage: 3V
    • No Load Current: 0.27A
    • Maximum Current: 1.05A
    • No Load Speed: 13,500 revolutions per minute (r/min)
    • Maximum Speed: 10,740 revolutions per minute (r/min)
    • Stall Torque: 68g.cm
    • Maximum Torque: 14g.cm
    • Stall Current: 4.10A
    Add to cartDone
  • 60 RPM BO Motor – (Single Shaft) Straight

    60 RPM BO Motor – (Single Shaft) Straight

    0 out of 5
    ₹55

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Single D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 60 RPM
    • Rated Torque: 1 Kg/cm
    Add to cartDone
  • 65mm Robot Wheel for BO Motors (Yellow)

    65mm Robot Wheel for BO Motors (Yellow)

    0 out of 5
    ₹18

    Specifications:

    • Loading Capacity (Kg): 2.5
    • D hole For BO Motor: 6 mm
    • Weight (gm): 34
    • Wheel Diameter(mm): 65 mm
    • ColorBlack (Tyre): Yellow (Rim)
    • Wheel Width 27 mm
    • Body Material Plastic
    • Grip Material Rubber
    • Center Shaft Hole Diameter
    • 4mm-(round side) and 3.5mm-(flat side)

     

    Add to cartDone
  • ACS712 20A Range Current Sensor Module

    ACS712 20A Range Current Sensor Module

    4.00 out of 5
    ₹150

    Specifications:

    • Supply Voltage: 4.5V ~ 5.5V DC
    • Measure Current Range: -20A ~ 20A
    • Sensitivity: 100mV/A
    Add to cartDone
  • ADXL335 3-Axis Analog Output Accelerometer Module

    ADXL335 3-Axis Analog Output Accelerometer Module

    0 out of 5
    ₹600

    Specifications

    Parameter Details
    Measurement Range ±3g
    Interface Type Analog Output
    Operating Voltage 3V – 5V
    Operating Temperature -40°C to +85°C
    Module Dimensions 1.5 cm × 1.5 cm × 1.1 cm
    Weight 5g
    Built-in Logic Converter Yes (for I2C Communication)
    Add to cartDone
  • Arduino Joystick Module – Dual Axis with Push Button

    Arduino Joystick Module – Dual Axis with Push Button

    0 out of 5
    ₹70

    Specifications

    Parameter Details
    Operating Voltage 5V
    Interface 2.54mm pin leads
    Potentiometer Resistance 10kΩ
    Output Type Analog signals (X and Y axes)
    Switch Built-in pressable switch
    Compatibility Arduino, Raspberry Pi, and other microcontrollers
    Add to cartDone
  • AS608 Optical Fingerprint Sensor Module

    AS608 Optical Fingerprint Sensor Module

    0 out of 5
    ₹900

    The AS608 Optical Fingerprint Sensor Module is a high-performance fingerprint recognition module that integrates image collection and processing algorithms in one compact unit. It supports fingerprint registration, 1:1 comparison, and 1:N searching, making it ideal for security systems, biometric authentication, and embedded applications. Features ✔ All-in-One Integrated Module – Includes both image collection and fingerprint…

    Add to cartDone
  • AS608 Optical Fingerprint Sensor Module

    AS608 Optical Fingerprint Sensor Module

    0 out of 5
    ₹900

    Specifications

    Parameter Details
    Resolution 500 dpi
    Fingerprint Entry Time < 1.0 second
    Window Area 15.3 × 18.2 mm
    Interface USB / UART
    Power Consumption Low power usage
    Fingerprint Storage Supports multiple fingerprints
    Application Biometric security, access control, attendance systems, and embedded development
    Add to cartDone
  • BMP180 Digital Barometric Pressure Sensor Module

    BMP180 Digital Barometric Pressure Sensor Module

    0 out of 5
    ₹105

    Specifications:

    🔹 Operating Voltage: 1.8V – 3.6V DC
    🔹 Pressure Range: 300 hPa to 1100 hPa (altitude 9000m to -500m)
    🔹 Accuracy: ±1 hPa (Pressure), ±0.5°C (Temperature)
    🔹 Resolution: 0.01 hPa (Pressure), 0.1°C (Temperature)
    🔹 Interface: I2C (default) & SPI
    🔹 Operating Temperature Range: -40°C to +85°C
    🔹 Low power consumption: 5µA in standard mode
    🔹 Dimensions: 21mm x 18mm

    Add to cartDone
  • BO Motor dual shaft 60 RPM – Straight

    BO Motor dual shaft 60 RPM – Straight

    0 out of 5
    ₹55

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Double D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 150 RPM
    • Rated Torque: 0.35 Kgcm
    Add to cartDone

End of content

End of content