₹ 260 Original price was: ₹260. ₹ 255Current price is: ₹255.
Features:
Operating Voltage 5V
Max Current: 20mA
Relay Contact Current Capacity at AC250V: 10A.
Relay Contact Current Capacity at DC5V: 10A
Power supply indicator lamp
Control indicator lamp
₹ 240 Original price was: ₹240. ₹ 230Current price is: ₹230.
Features:
Maximum switching voltage: 250VAC / 30VDC
Maximum switching current: 10A
Each relay features an LED indicator.
Dimensions: 51 x 39 x 18mm (Length x Width x Height)
₹ 199 Original price was: ₹199. ₹ 160Current price is: ₹160.
Features:
5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
Equipped with high-current relay, AC250V 10A; DC30V 10A.
Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Indication LED’s for Relay output status.
Add to wishlist Compare Quick view
₹ 15
Technical Specifications
Specification
Details
Relay Type
SPDT (Single Pole Double Throw)
Trigger Voltage (Coil Voltage)
5V DC
Coil Resistance
70Ω
Nominal Coil Current
70mA
Max AC Load Current
10A @ 250V / 125V AC
Max DC Load Current
10A @ 30V / 28V DC
Number of Pins
5 (Coil End 1, Coil End 2, COM, NC, NO)
Switching Capacity
7A
Add to wishlist Compare Quick view
₹ 15
Specifications:
Nominal Operating Voltage: 5V
Operating Voltage Range: 3.0V to 6.0V
Nominal Voltage: 3V
No Load Current: 0.27A
Maximum Current: 1.05A
No Load Speed: 13,500 revolutions per minute (r/min)
Maximum Speed: 10,740 revolutions per minute (r/min)
Stall Torque: 68g.cm
Maximum Torque: 14g.cm
Stall Current: 4.10A
Add to wishlist Compare Quick view
₹ 55
Specifications:
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Single D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 60 RPM
Rated Torque: 1 Kg/cm
Add to wishlist Compare Quick view
₹ 18
Specifications:
Loading Capacity (Kg): 2.5
D hole For BO Motor: 6 mm
Weight (gm): 34
Wheel Diameter(mm): 65 mm
ColorBlack (Tyre): Yellow (Rim)
Wheel Width 27 mm
Body Material Plastic
Grip Material Rubber
Center Shaft Hole Diameter
4mm-(round side) and 3.5mm-(flat side)
Add to wishlist Compare Quick view
₹ 55
Specifications:
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Double D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 150 RPM
Rated Torque: 0.35 Kgcm
Add to wishlist Compare Quick view
₹ 100
Specifications:
Working voltage: DC4.5V-35V
Output: 0-5A 90W
PWM duty cycle: 1% -100%
PWM frequency: 20KHz
Size: 30.5 * 26.5 * 13.5mm
Add to wishlist Compare Quick view
₹ 160
Specifications
Operating Voltage: 4.8V – 6V DC
Output Current: 15mA (5.0V)
Output Signal: 1.5ms ± 0.5ms
Knob Diameter: 12mm
Dimensions: 35×30×15mm (L×W×H)
Weight: 8g
Shipping Weight: 12g
Shipping Dimensions: 6 × 4 × 3 cm
Color: Blue
Add to wishlist Compare Quick view
₹ 160
📌 Specifications
🔹 Operating Voltage: 4.8V – 6V DC
🔹 Output Current: 15mA (5.0V)
🔹 Output Signal: 1.5ms ± 0.5ms
🔹 Dimensions: 35mm x 30mm x 15mm
🔹 Knob Diameter: 12mm
🔹 Weight: 8g
🔹 Color: Blue
Add to wishlist Compare Quick view
₹ 145
Specifications
Operating Supply Voltage: Up to 46V
Total DC Current: Up to 4A (2A per channel)
Logic Voltage: 5V
Drive Voltage: 5V – 35V
Logic Current: 0-36mA
Drive Current: 2A (max per bridge)
Maximum Power: 25W
Dimensions: 44 x 44 x 28 mm (LxWxH)
Weight: 26g
Add to wishlist Compare Quick view
₹ 92
Specifications
Parameter
Value
Supply Voltage
8V – 35V
Operating Current (Without Heatsink)
1A per phase
Maximum Current (With Heatsink)
2A per phase
Logic Voltage Input
3V – 5.5V
Step Modes
Full, ½, ¼, ⅛, 1/16
Protection Features
Thermal shutdown, UVLO, short circuit protection
Additional Cooling
Required for operation above 1A
Add to wishlist Compare Quick view
₹ 92
Specifications:
Universal for JR and FP connector § Cable length: 25cm
No load; Operating speed:
0.12 sec / 60 degree (4.8V),
0.10 sec / 60 degree (6.0V)
Temperature: -30~60’C
Dead band width: 5us
Add to wishlist Compare Quick view
₹ 370
Specifications
Operating Voltage: 2-3S LiPo Battery
Current Rating: 30A Continuous, 40A Peak
BEC Output: 5V/2A
Start Modes: Normal, Soft, Super-Soft
Compatibility: Fixed-wing aircraft, helicopters, multi-rotors
Safety Features: Backward-polarity protection, 5V receiver line protection
Heat Management: Heat sink with thermal membrane
Programmability: Fully programmable via RC remote control
Add to wishlist Compare Quick view
₹ 50
Specifications:
Operating Voltage: 2.5 ~ 6V
Operating Current: 130 ~ 220mA
Flow Rate: 80 ~ 120 L/H
Maximum Lift: 40 ~ 110 mm
Outlet Outside Diameter: 7.5 mm
Outlet Inside Diameter: 5 mm
Add to wishlist Compare Quick view
₹ 285
Specifications
Parameter
Value
Model
MG995
Weight
55g
Operating Voltage
4.8V – 7.2V
Torque @ 4.8V
10kg/cm
Torque @ 6.6V
12kg/cm
Operating Speed @ 4.8V
0.20 sec/60°
Operating Speed @ 6.6V
0.16 sec/60°
Rotational Angle
180° (±90°)
Dead Band Width
1 µs
End of content
End of content