Showing 21–34 of 34 results

  • MQ 135 Air Quality/Gas Detector Sensor Module For Arduino

    MQ 135 Air Quality/Gas Detector Sensor Module For Arduino

    0 out of 5
    120

    Specifications:

    • Sensitivity to Ammonia, Sulphide and Benzene steam
    • Sensitive for benzene, alcohol, smoke
    • Fast response and recovery
    • Adjustable sensitivity
    • Signal output indicator
    • Output voltage boosts along with the concentration of the measured gases increases.
  • MQ-2 Gas Sensor Module

    MQ-2 Gas Sensor Module

    0 out of 5
    120

    📌 Specifications

    🔹 Gas Detection: LPG, methane, hydrogen, propane, carbon monoxide, alcohol
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~20 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

  • MQ-3 Alcohol Sensor Module

    MQ-3 Alcohol Sensor Module

    0 out of 5
    120

    📌 Specifications

    🔹 Gas Detection: Alcohol, ethanol vapors
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~20 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

  • MQ-5 Methane LPG Liquid Propane Gas Sensor Module

    MQ-5 Methane LPG Liquid Propane Gas Sensor Module

    0 out of 5
    120

    Specifications:

    • Operating Voltage: 5V DC
    • High sensitivity to LPG, natural gas, town gas.
    • Small sensitivity to alcohol, smoke.
    • Stable and long life.
    • Simple drive circuit.
    • Fast response
  • MQ-6 Gas Sensor Module

    MQ-6 Gas Sensor Module

    0 out of 5
    130

    📌 Specifications

    🔹 Gas Detection: LPG, isobutane, propane
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~20 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

  • MQ-7 Carbon Monoxide (CO) Gas Sensor Module

    MQ-7 Carbon Monoxide (CO) Gas Sensor Module

    0 out of 5
    130

    📌 Specifications

    🔹 Gas Detection: Carbon Monoxide (CO)
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~60 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

  • PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    0 out of 5
    200

    The PT2272 4-Channel RF Remote Control is a wireless transmitter-receiver pair designed for remote-controlled applications such as toy cars, home automation, and short-distance wireless switching. Operating at +5V DC, it provides momentary operation, meaning that the output remains active only while the corresponding button is pressed. This RF module offers a 100-meter range in open…

  • RFID 13.56MHz Card (Pack of 2)

    RFID 13.56MHz Card (Pack of 2)

    0 out of 5
    45

    Specifications:

    🔹 Type: RFID Contactless Smart Card
    🔹 Chip Type: MIFARE 1K (or similar)
    🔹 Operating Frequency: 13.56MHz
    🔹 Protocol: ISO 14443A
    🔹 Storage Capacity: 1KB EEPROM
    🔹 Reading Distance: Up to 10cm (varies by reader)
    🔹 Material: PVC plastic
    🔹 Dimensions: 85.6 x 54 mm (Standard Credit Card Size)
    🔹 Color: White
    🔹 Weight: Approx. 6g per card

  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    105

    Specifications:

    • Integrated RC522 IC
    • 13.56MHz Contactless Communication
    • Low Power Consumption
    • High-Speed Communication
    • SPI Interface
    • Compact and Lightweight
  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    150

    Specifications:

    🔹 Operating Voltage: 3.3V DC (5V tolerant with level shifters)
    🔹 Current Consumption: 13-26mA
    🔹 Frequency: 13.56 MHz
    🔹 Interface: SPI (default), I2C, UART
    🔹 Data Transfer Rate: 10 Mbps
    🔹 Reading Distance: Up to 5 cm
    🔹 Card Types Supported: MIFARE 1K, MIFARE 4K, Ultralight, DESFire, Plus
    🔹 Operating Temperature: -20°C to +80°C
    🔹 Dimensions: 60mm x 39mm

  • RS232 to TTL Serial Port Converter DB9 MAX3232 Module

    RS232 to TTL Serial Port Converter DB9 MAX3232 Module

    0 out of 5
    60

    📌 Specifications

    🔹 Chipset: MAX3232
    🔹 Operating Voltage: 3.3V – 5V DC
    🔹 Baud Rate: Up to 120kbps
    🔹 Communication Interface: RS232 (DB9) to TTL
    🔹 DB9 Connector Type: Male
    🔹 Logic Level: TTL (0V – 5V)
    🔹 Operating Temperature: -40°C to 85°C
    🔹 Module Dimensions: Compact and lightweight

  • Soil Moisture Hygrometer Detection Humidity Sensor Module

    Soil Moisture Hygrometer Detection Humidity Sensor Module

    0 out of 5
    50

    Specifications:

    Operating Voltage 3.3V – 5V
    Output Modes Digital and Analog
    PCB Size 3 cm x 1.6 cm
    Comparator Chip LM393
    Interface 4-Wire (VCC, GND, DO, AO)
    Power Consumption <20 mA
    Detection Range Adjustable via potentiometer
    Dimensions 30 mm x 16 mm
  • Submersible Mini Water Pump 3-6V DC

    Submersible Mini Water Pump 3-6V DC

    0 out of 5
    50

    Specifications:

    • Operating Voltage: 2.5 ~ 6V
    • Operating Current: 130 ~ 220mA
    • Flow Rate: 80 ~ 120 L/H
    • Maximum Lift: 40 ~ 110 mm
    • Outlet Outside Diameter: 7.5 mm
    • Outlet Inside Diameter: 5 mm
  • TCS3200 Colour Recognition Sensor Module

    TCS3200 Colour Recognition Sensor Module

    0 out of 5
    430

    Specifications:

    • Operating Voltage: 3V-5V
    • High-resolution conversion of light intensity to frequency.
    • Chip pins all has drawn for standard 100.
    • Put the needle (2.54 mm).
    • Mil-convenient for bitmap board.
    • Programmable color and full-scale output frequency.
    • Communicate directly with a microcontroller.
    • Low-profile surface mount package.

End of content

End of content