Showing 21–35 of 35 results
Add to wishlist Compare Quick view
₹ 280
Specifications
Parameter
Details
Total Length
7.5 cm
Active Sensor Length
55 mm
Life Cycle
> 1 million bends
Height
0.43 mm (0.017″)
Flat Resistance
10K Ohms ±30%
Bend Resistance
Min. 20K Ohms ±30% (@ 180° pinch bend)
Power Rating
0.5W continuous, 1W peak
Add to wishlist Compare Quick view
₹ 45
Specifications:
Type: Phenolic (FR2) Material
Copper Layer Laminated
Easy for Soldering
Size: 140 mm x 90 mm
Add to wishlist Compare Quick view
₹ 70
Specifications:
Operating Voltage: 5V DC
Static Current: < 2mA
Output Signal: 5V TTL pulse
Detection Angle: < 15°
Detection Range: 2cm to 400cm
Precision: Up to 2mm
Input Trigger Signal: 10µs TTL pulse
Echo Signal: TTL pulse width proportional to distance
Add to wishlist Compare Quick view
₹ 70
Specifications:
Operating Voltage: 4V to 30V
Temperature Range: -55°C to +150°C
Output Voltage: 10mV per °C
Accuracy: ±0.5°C (at 25°C)
Power Consumption: 60 µA (Typical)
Response Time: Less than 1 second
Output Impedance: Low (less than 1Ω)
Package Type: TO-92 / SOIC-8
Add to wishlist Compare Quick view
₹ 50
Specifications:
Working voltage: DC 3.3-5V.
IC Chip: LM393
Signal output indication.
The output is digital.
Single channel signal output.
With the retaining bolt hole, convenient installation.
Output low level and the signal light when there is sound.
Add to wishlist Compare Quick view
₹ 120
Specifications:
Sensitivity to Ammonia, Sulphide and Benzene steam
Sensitive for benzene, alcohol, smoke
Fast response and recovery
Adjustable sensitivity
Signal output indicator
Output voltage boosts along with the concentration of the measured gases increases.
Add to wishlist Compare Quick view
₹ 120
📌 Specifications
🔹 Gas Detection : LPG, methane, hydrogen, propane, carbon monoxide, alcohol
🔹 Operating Voltage : 5V DC
🔹 Power Consumption : ~150mA
🔹 Analog Output (AO) : 0-5V
🔹 Digital Output (DO) : High/Low signal (threshold adjustable)
🔹 Preheat Time : ~20 seconds
🔹 Response Time : <10 seconds
🔹 Operating Temperature : -10°C to 50°C
🔹 Dimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 120
📌 Specifications
🔹 Gas Detection : Alcohol, ethanol vapors
🔹 Operating Voltage : 5V DC
🔹 Power Consumption : ~150mA
🔹 Analog Output (AO) : 0-5V
🔹 Digital Output (DO) : High/Low signal (threshold adjustable)
🔹 Preheat Time : ~20 seconds
🔹 Response Time : <10 seconds
🔹 Operating Temperature : -10°C to 50°C
🔹 Dimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 120
Specifications:
Operating Voltage: 5V DC
High sensitivity to LPG, natural gas, town gas.
Small sensitivity to alcohol, smoke.
Stable and long life.
Simple drive circuit.
Fast response
Add to wishlist Compare Quick view
₹ 130
📌 Specifications
🔹 Gas Detection : LPG, isobutane, propane
🔹 Operating Voltage : 5V DC
🔹 Power Consumption : ~150mA
🔹 Analog Output (AO) : 0-5V
🔹 Digital Output (DO) : High/Low signal (threshold adjustable)
🔹 Preheat Time : ~20 seconds
🔹 Response Time : <10 seconds
🔹 Operating Temperature : -10°C to 50°C
🔹 Dimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 130
📌 Specifications
🔹 Gas Detection : Carbon Monoxide (CO)
🔹 Operating Voltage : 5V DC
🔹 Power Consumption : ~150mA
🔹 Analog Output (AO) : 0-5V
🔹 Digital Output (DO) : High/Low signal (threshold adjustable)
🔹 Preheat Time : ~60 seconds
🔹 Response Time : <10 seconds
🔹 Operating Temperature : -10°C to 50°C
🔹 Dimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 50
Specifications:
Operating Voltage
3.3V – 5V
Output Modes
Digital and Analog
PCB Size
3 cm x 1.6 cm
Comparator Chip
LM393
Interface
4-Wire (VCC, GND, DO, AO)
Power Consumption
<20 mA
Detection Range
Adjustable via potentiometer
Dimensions
30 mm x 16 mm
Add to wishlist Compare Quick view
₹ 50
Specifications:
Operating Voltage: 2.5 ~ 6V
Operating Current: 130 ~ 220mA
Flow Rate: 80 ~ 120 L/H
Maximum Lift: 40 ~ 110 mm
Outlet Outside Diameter: 7.5 mm
Outlet Inside Diameter: 5 mm
Add to wishlist Compare Quick view
₹ 430
Specifications:
Operating Voltage: 3V-5V
High-resolution conversion of light intensity to frequency.
Chip pins all has drawn for standard 100.
Put the needle (2.54 mm).
Mil-convenient for bitmap board.
Programmable color and full-scale output frequency.
Communicate directly with a microcontroller.
Low-profile surface mount package.
Add to wishlist Compare Quick view
₹ 32
Specifications:
Input voltage : 4.5V ~ 5.5V
Input Interface: Micro USB port
Charging method: linear charge
A full charge voltage: 4.2V
Power: 4.2 w
Charging accuracy: 1.5%
Operating Temperature: -10 to +85º C
Charging indicator: LED indicators for charging and full charging.
End of content
End of content
Load more