Showing 21–38 of 38 results
Add to wishlist Compare Quick view
₹ 160Specifications
Operating Voltage: 4.8V – 6V DCOutput Current: 15mA (5.0V)Output Signal: 1.5ms ± 0.5msKnob Diameter: 12mmDimensions: 35×30×15mm (L×W×H)Weight: 8gShipping Weight: 12gShipping Dimensions: 6 × 4 × 3 cmColor: Blue
Add to wishlist Compare Quick view
₹ 160📌 Specifications
🔹 Operating Voltage: 4.8V – 6V DCOutput Current: 15mA (5.0V)Output Signal: 1.5ms ± 0.5msDimensions: 35mm x 30mm x 15mmKnob Diameter: 12mmWeight: 8gColor: Blue
Add to wishlist Compare Quick view
₹ 70Specifications:
Operating Voltage: 5V DCStatic Current: < 2mAOutput Signal: 5V TTL pulseDetection Angle: < 15°Detection Range: 2cm to 400cmPrecision: Up to 2mmInput Trigger Signal: 10µs TTL pulseEcho Signal: TTL pulse width proportional to distance
Add to wishlist Compare Quick view
₹ 150Specifications
Operating Supply Voltage: Up to 46VTotal DC Current: Up to 4A (2A per channel)Logic Voltage: 5VDrive Voltage: 5V – 35VLogic Current: 0-36mADrive Current: 2A (max per bridge)Maximum Power: 25WDimensions: 44 x 44 x 28 mm (LxWxH)Weight: 26g
Add to wishlist Compare Quick view
₹ 70Specifications:
Operating Voltage: 4V to 30V Temperature Range: -55°C to +150°C Output Voltage: 10mV per °C Accuracy: ±0.5°C (at 25°C) Power Consumption: 60 µA (Typical) Response Time: Less than 1 second Output Impedance: Low (less than 1Ω) Package Type: TO-92 / SOIC-8
Add to wishlist Compare Quick view
₹ 70Specifications:
Working voltage: DC 3.3-5V.
IC Chip: LM393
Signal output indication.
The output is digital.
Single channel signal output.
With the retaining bolt hole, convenient installation.
Output low level and the signal light when there is sound.
Add to wishlist Compare Quick view
₹ 130Specifications:
Sensitivity to Ammonia, Sulphide and Benzene steam
Sensitive for benzene, alcohol, smoke
Fast response and recovery
Adjustable sensitivity
Signal output indicator
Output voltage boosts along with the concentration of the measured gases increases.
Add to wishlist Compare Quick view
₹ 120📌 Specifications
🔹 Gas Detection : LPG, methane, hydrogen, propane, carbon monoxide, alcoholOperating Voltage : 5V DC Power Consumption : ~150mA Analog Output (AO) : 0-5VDigital Output (DO) : High/Low signal (threshold adjustable)Preheat Time : ~20 secondsResponse Time : <10 secondsOperating Temperature : -10°C to 50°CDimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 120📌 Specifications
🔹 Gas Detection : Alcohol, ethanol vaporsOperating Voltage : 5V DC Power Consumption : ~150mA Analog Output (AO) : 0-5VDigital Output (DO) : High/Low signal (threshold adjustable)Preheat Time : ~20 secondsResponse Time : <10 secondsOperating Temperature : -10°C to 50°CDimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 150Specifications:
Operating Voltage: 5V DC
High sensitivity to LPG, natural gas, town gas.
Small sensitivity to alcohol, smoke.
Stable and long life.
Simple drive circuit.
Fast response
Add to wishlist Compare Quick view
₹ 110📌 Specifications
🔹 Gas Detection : LPG, isobutane, propaneOperating Voltage : 5V DC Power Consumption : ~150mA Analog Output (AO) : 0-5VDigital Output (DO) : High/Low signal (threshold adjustable)Preheat Time : ~20 secondsResponse Time : <10 secondsOperating Temperature : -10°C to 50°CDimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 130📌 Specifications
🔹 Gas Detection : Carbon Monoxide (CO)Operating Voltage : 5V DC Power Consumption : ~150mA Analog Output (AO) : 0-5VDigital Output (DO) : High/Low signal (threshold adjustable)Preheat Time : ~60 seconds Response Time : <10 seconds Operating Temperature : -10°C to 50°C Dimensions : 32mm x 22mm x 27mm
Add to wishlist Compare Quick view
₹ 90Specifications:
Universal for JR and FP connector § Cable length: 25cm
No load; Operating speed:
0.12 sec / 60 degree (4.8V),
0.10 sec / 60 degree (6.0V)
Temperature: -30~60’C
Dead band width: 5us
Add to wishlist Compare Quick view
₹ 370Specifications
Operating Voltage: 2-3S LiPo BatteryCurrent Rating: 30A Continuous, 40A PeakBEC Output: 5V/2AStart Modes: Normal, Soft, Super-SoftCompatibility: Fixed-wing aircraft, helicopters, multi-rotorsSafety Features: Backward-polarity protection, 5V receiver line protectionHeat Management: Heat sink with thermal membraneProgrammability: Fully programmable via RC remote control
Add to wishlist Compare Quick view
₹ 60Specifications:
Operating Voltage 3.3V – 5V
Output Modes Digital and Analog
PCB Size 3 cm x 1.6 cm
Comparator Chip LM393
Interface 4-Wire (VCC, GND, DO, AO)
Power Consumption <20 mA
Detection Range Adjustable via potentiometer
Dimensions 30 mm x 16 mm
Add to wishlist Compare Quick view
₹ 70Specifications:
Operating Voltage: 2.5 ~ 6V
Operating Current: 130 ~ 220mA
Flow Rate: 80 ~ 120 L/H
Maximum Lift: 40 ~ 110 mm
Outlet Outside Diameter: 7.5 mm
Outlet Inside Diameter: 5 mm
Add to wishlist Compare Quick view
₹ 420Specifications:
Operating Voltage: 3V-5V
High-resolution conversion of light intensity to frequency.
Chip pins all has drawn for standard 100.
Put the needle (2.54 mm).
Mil-convenient for bitmap board.
Programmable color and full-scale output frequency.
Communicate directly with a microcontroller.
Low-profile surface mount package.
Add to wishlist Compare Quick view
₹ 280Specifications
Parameter Value
Model MG995
Weight 55g
Operating Voltage 4.8V – 7.2V
Torque @ 4.8V 10kg/cm
Torque @ 6.6V 12kg/cm
Operating Speed @ 4.8V 0.20 sec/60°
Operating Speed @ 6.6V 0.16 sec/60°
Rotational Angle 180° (±90°)
Dead Band Width 1 µs
End of content
End of content
Load more
