Showing 21–30 of 30 results

  • ESP-12E ESP 8266 Serial Port WiFi Wireless Transceiver Module

    ESP-12E ESP 8266 Serial Port WiFi Wireless Transceiver Module

    0 out of 5
    220

    Specifications:

    • Wireless Standards: 802.11 b/g/n
    • Frequency Range: 2.4GHz – 2.5GHz
    • Data Interfaces: UART, HSPI, I2C, I2S, GPIO, PWM, IR Remote Control
    • Operating Voltage: 3.0V – 3.6V (Recommended: 3.3V)
    • Average Current Consumption: 80mA
    • Operating Temperature: -40°C to 125°C

    PCB Size: 25mm × 16mm

  • ESP32 38Pin Development Board WiFi+Bluetooth

    ESP32 38Pin Development Board WiFi+Bluetooth

    0 out of 5
    400

    Specifications:

    • 4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
    • Ultra-Low power consumption works perfectly with the IDE
    • Support LWIP protocol, Freertos
    • Support Three Modes: AP, STA, and AP+STA
    • ESP 32 is safe, reliable, and scalable to a variety of applications
  • ESP32 CAM WiFi Module Bluetooth Camera Module 2MP For DIY

    ESP32 CAM WiFi Module Bluetooth Camera Module 2MP For DIY

    0 out of 5
    550

    Specifications:

    • Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
    • Low-Power Dual-core 32-bit CPU for application processors
    • Up to 240MHz, up to 600 DMIPS
    • Built-in 520 KB SRAM, external 4M PSRAM
    • Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
    • Support OV2640 and OV7670 cameras with built-in flash
    • Support for images Wi-Fi upload
    • Support TF card
  • L298N Based Motor Driver Module for DIY Projects

    L298N Based Motor Driver Module for DIY Projects

    0 out of 5
    150

    Specifications

    • Operating Supply Voltage: Up to 46V
    • Total DC Current: Up to 4A (2A per channel)
    • Logic Voltage: 5V
    • Drive Voltage: 5V – 35V
    • Logic Current: 0-36mA
    • Drive Current: 2A (max per bridge)
    • Maximum Power: 25W
    • Dimensions: 44 x 44 x 28 mm (LxWxH)
    • Weight: 26g
  • Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    0 out of 5
    250

    Specifications:

    • WiFi Module: ESP-12E
    • Processor: ESP8266
    • CP2102 Chip
    • Built-in Flash: 32Mbit
    • Antenna: Onboard PCB antenna
    • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
    • WiFi Protocol: IEEE 802.11 b/g/n
    • Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
    • WiFi Mode: Station / SoftAP / SoftAP Station
    • Power Supply: 5V
    • Logic Level: 3.3V
  • Raspberry Pi Pico W

    Raspberry Pi Pico W

    0 out of 5
    650

    Specifications:

    • Product: Raspberry Pi Pico W
    • Microcontroller: RP2040
    • Flash Memory: 2MB
    • Processor: Dual-core Cortex-M0+ (up to 133MHz)
    • On-board single-band 2.4GHz wireless interfaces (802.11n)
    • Micro USB B port for power and data
    • 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
    • 23 GPIO are digital-only, with three also being ADC capable
  • SD Card Reading Writing Module for Arduino

    SD Card Reading Writing Module for Arduino

    0 out of 5
    100

    QUICK OVERVIEW:

    • All SD SPI pins output, MOSI, SCK, MISO, and CS.
    • Support 5V/3.3V input.
    • This module can handle 2GB SD cards.
    • Size:4.7  x 3.1 cm.
    • LED indicator.
    • SD Card Holder.
    • Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
  • Servo SG90 9g 180 Degree Motor for Arduino

    Servo SG90 9g 180 Degree Motor for Arduino

    0 out of 5
    90

    Specifications:

    • Universal for JR and FP connector § Cable length: 25cm
    • No load; Operating speed:

    0.12 sec / 60 degree (4.8V),

    0.10 sec / 60 degree (6.0V)

    • Temperature: -30~60’C
    • Dead band width: 5us
  • STM32F103C8T6 Minimum System Development Board

    STM32F103C8T6 Minimum System Development Board

    0 out of 5
    200

    Specifications:

    • Microcontroller: STM32F103C8T6
    • Core: ARM Cortex-M3 32-bit CPU
    • Operating Frequency: 72MHz
    • Flash Memory: 64KB
    • SRAM: 20KB
    • Power Supply: 2.0V – 3.6V
    • Debugging Interface: SWD (Serial Wire Debug)
    • Clock: 4-16MHz crystal
    • Dimensions: 54mm × 22mm
    • Weight: 9g
  • TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module Type C

    TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module Type C

    0 out of 5
    32

    Specifications:

    • Input voltage : 4.5V ~ 5.5V
    • Input Interface: Micro USB port
    • Charging method: linear charge
    • A full charge voltage: 4.2V
    • Power: 4.2 w
    • Charging accuracy: 1.5%
    • Operating Temperature: -10 to +85ºC
    • Charging indicator: LED indicators for charging and full charging.

End of content

End of content