Showing 21–27 of 27 results

  • FR2 A Grade Material (140 x 90 mm) - Single Sided PCB

    FR2 A Grade Material (140 x 90 mm) – Single Sided PCB

    0 out of 5
    ₹45

    Specifications:

    • Type: Phenolic (FR2) Material
    • Copper Layer Laminated
    • Easy for Soldering
    • Size: 140 mm x 90 mm
    Add to cartDone
  • Product on sale
    LM2596S DC-DC Step-Down Power Supply

    LM2596S DC-DC Step-Down Power Supply

    0 out of 5
    Original price was: ₹120.Current price is: ₹70.

    Specifications Parameter Details:

    Input Voltage Range:3V to 40V

    Output Voltage Range: 1.5V to 35V (adjustable)

    Output Current Rated: 2A, Max: 3A (requires heatsink)

    Switching Frequency 150kHz Efficiency Up to 92% (depending on conditions)

    Load Regulation ±0.5%

    Voltage Regulation ±0.5%

    Dynamic Response Speed 5% at 200µs

    Operating Temperature -40°C to +85°C (industrial grade)

    Add to cartDone
  • Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    0 out of 5
    ₹250

    Specifications:

    • WiFi Module: ESP-12E
    • Processor: ESP8266
    • CP2102 Chip
    • Built-in Flash: 32Mbit
    • Antenna: Onboard PCB antenna
    • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
    • WiFi Protocol: IEEE 802.11 b/g/n
    • Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
    • WiFi Mode: Station / SoftAP / SoftAP Station
    • Power Supply: 5V
    • Logic Level: 3.3V
    Add to cartDone
  • Raspberry Pi Pico W

    Raspberry Pi Pico W

    0 out of 5
    ₹650

    Specifications:

    • Product: Raspberry Pi Pico W
    • Microcontroller: RP2040
    • Flash Memory: 2MB
    • Processor: Dual-core Cortex-M0+ (up to 133MHz)
    • On-board single-band 2.4GHz wireless interfaces (802.11n)
    • Micro USB B port for power and data
    • 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
    • 23 GPIO are digital-only, with three also being ADC capable
    Add to cartDone
  • SD Card Reading Writing Module for Arduino

    SD Card Reading Writing Module for Arduino

    0 out of 5
    ₹100

    QUICK OVERVIEW:

    • All SD SPI pins output, MOSI, SCK, MISO, and CS.
    • Support 5V/3.3V input.
    • This module can handle 2GB SD cards.
    • Size:4.7  x 3.1 cm.
    • LED indicator.
    • SD Card Holder.
    • Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
    Add to cartDone
  • STM32F103C8T6 Minimum System Development Board

    STM32F103C8T6 Minimum System Development Board

    0 out of 5
    ₹200

    Specifications:

    • Microcontroller: STM32F103C8T6
    • Core: ARM Cortex-M3 32-bit CPU
    • Operating Frequency: 72MHz
    • Flash Memory: 64KB
    • SRAM: 20KB
    • Power Supply: 2.0V – 3.6V
    • Debugging Interface: SWD (Serial Wire Debug)
    • Clock: 4-16MHz crystal
    • Dimensions: 54mm × 22mm
    • Weight: 9g
    Read moreDone
  • TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module Type C

    TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module Type C

    0 out of 5
    ₹32

    Specifications:

    • Input voltage : 4.5V ~ 5.5V
    • Input Interface: Micro USB port
    • Charging method: linear charge
    • A full charge voltage: 4.2V
    • Power: 4.2 w
    • Charging accuracy: 1.5%
    • Operating Temperature: -10 to +85ºC
    • Charging indicator: LED indicators for charging and full charging.
    Add to cartDone

End of content

End of content