Showing 21–40 of 46 results

  • ARDUINO UNO Development Board DIP

    ARDUINO UNO Development Board DIP

    5.00 out of 5
    ₹480

    Specifications:

    • Microcontroller ATmega328 DIP – Interface CH340G
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Digital I / O Pins 14
    • PWM output PINS: 6
    • Analog Input Pins: 6
    Add to cartDone
  • ARDUINO UNO Development Board Smd for School/College Projects DIY Free Ebook

    ARDUINO UNO Development Board Smd for School/College Projects DIY Free Ebook

    0 out of 5
    ₹280

    Specifications:

    • Microcontroller ATmega328 DIP – Interface CH340G
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Digital I / O Pins 14
    • PWM output PINS: 6
    • Analog Input Pins: 6
    Add to cartDone
  • ATmega328P-U 8-bit MCU for Embedded Systems & IoT

    ATmega328P-U 8-bit MCU for Embedded Systems & IoT

    0 out of 5
    ₹390

    Specifications:

    Specification Details
    Microcontroller Type 8-bit ATmega328P
    I/O Pins 23
    Timers 3 (8-bit/16-bit)
    Clock Frequency Up to 20 MHz
    Program Memory 32KB Flash
    RAM 2KB SRAM
    EEPROM 1024 Bytes
    Interfaces I2C, SPI, USART
    Operating Voltage 2.7V – 5.5V
    Temperature Range -24°C to 84°C
    Dimensions (LxWxH) 34.8 x 7.5 x 4.57 mm
    Package Type Through-Hole (DIP)
    Add to cartDone
  • Basic Electronics Component Kit

    Basic Electronics Component Kit

    0 out of 5
    ₹200

    The Basic Electronics Component Kit is a comprehensive set designed for students, hobbyists, and DIY electronics enthusiasts. This kit contains essential components like resistors, capacitors, LEDs, sensors, and integrated circuits, making it an ideal choice for learning and prototyping electronic circuits. Whether you’re working on an Arduino project, sensor-based automation, or circuit experiments, this kit…

    Add to cartDone
  • BC547 NPN Transistor (Pack of 4)

    BC547 NPN Transistor (Pack of 4)

    0 out of 5
    ₹10

    Specifications:

    • Transistor Type: NPN
    • Collector-Emitter Voltage (Vce): 45V
    • Collector-Base Voltage (Vcb): 50V
    • Emitter-Base Voltage (Veb): 5V
    • Collector Current (Ic): 100mA
    • Power Dissipation (Ptot): 500mW
    • DC Current Gain (hFE): 110 to 800
    • Transition Frequency (fT): 300 MHz
    • Package Type: TO-92
    Add to cartDone
  • BC558 PNP Transistor (Pack of 4)

    BC558 PNP Transistor (Pack of 4)

    0 out of 5
    ₹10

    ✔ TO-92 Package for Easy PCB Mounting

    Specifications:

    • Transistor Type: PNP
    • Collector-Emitter Voltage (Vce): -30V
    • Collector-Base Voltage (Vcb): -30V
    • Emitter-Base Voltage (Veb): -5V
    • Collector Current (Ic): -100mA
    • Power Dissipation (Ptot): 500mW
    • DC Current Gain (hFE): 110 to 800
    • Transition Frequency (fT): 150 MHz
    • Package Type: TO-92
    Add to cartDone
  • Crystal Oscillator Assorted Kit – 9 Kinds

    Crystal Oscillator Assorted Kit – 9 Kinds

    0 out of 5
    ₹220

    🛠 Specifications & Kit Contents

    Oscillator Type Frequency Package Type Quantity
    32KHz 32KHz SMD 2×6mm 3
    32.768KHz 32.768KHz SMD 3×8mm 3
    6MHz 6MHz 49S DIP 3
    8MHz 8MHz 49S DIP 3
    11.0592MHz 11.0592MHz 49S DIP 3
    12MHz 12MHz 49S DIP 3
    22.1184MHz 22.1184MHz 49S DIP 3
    24MHz 24MHz 49S DIP 3
    24.576MHz 24.576MHz 49S DIP 3
    Add to cartDone
  • Digispark ATTINY85 USB Development Board

    Digispark ATTINY85 USB Development Board

    0 out of 5
    ₹250

    Specifications:

    • Microcontroller: ATtiny85
    • Interface: USB
    • Development Environment: Arduino IDE
    • I/O Pins: 6 (digital, analog, PWM configurable)
    • PWM Outputs: 3 (expandable via software PWM)
    • Analog Inputs: 4
    • Communication: I2C, SPI (via USI)
    • Power Supply: USB or 6V – 35V DC
    • Onboard Regulator: 150mA, 5V
    • Size: Ultra-compact for space-constrained projects
    Add to cartDone
  • DPDT ON-OFF Rocker Switch – 2 Amp (Pack of 3)

    DPDT ON-OFF Rocker Switch – 2 Amp (Pack of 3)

    0 out of 5
    ₹20

    The DPDT ON-OFF Rocker Switch is a simple, reliable, and versatile component for powering your electronic projects and devices. Designed for easy installation and operation, this switch is suitable for various applications requiring efficient power control.

    Add to cartDone
  • ECG Module AD8232 Heart ECG Monitoring Sensor Kit for Arduino

    ECG Module AD8232 Heart ECG Monitoring Sensor Kit for Arduino

    0 out of 5
    ₹690

    Specifications

    Parameter Value
    Operating Voltage 3.3V DC
    Analog Output Yes
    Temperature Range -40°C to 90°C
    Cable Length 50 cm
    Board Dimensions 36mm x 30mm x 18mm
    Weight 5g
    Connector Type 3.5mm Jack for ECG pads
    Add to cartDone
  • ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    0 out of 5
    ₹150

    Specifications

    • Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
    • Protocol Stack: Integrated TCP/IP
    • Processor: Low-power 32-bit CPU
    • Communication Interfaces: SDIO 1.1/2.0, SPI, UART
    • Wireless Technologies: STBC, 1×1 MIMO, 2×1 MIMO
    • Flash Memory: 1MB (upgraded from 512KB)
    • GPIO Pins: 2 (for sensors and peripherals)
    • Wake-up Time: <2ms
    • Standby Power Consumption: <1.0mW (DTIM3)
    • Operating Voltage: 3.3V (requires logic level converter for 5V systems)
    • Compatibility: Arduino, Raspberry Pi, PIC, and other microcontrollers
    • Dimensions: Compact form factor
    Read moreDone
  • ESP-12E ESP 8266 Serial Port WiFi Wireless Transceiver Module

    ESP-12E ESP 8266 Serial Port WiFi Wireless Transceiver Module

    0 out of 5
    ₹220

    Specifications:

    • Wireless Standards: 802.11 b/g/n
    • Frequency Range: 2.4GHz – 2.5GHz
    • Data Interfaces: UART, HSPI, I2C, I2S, GPIO, PWM, IR Remote Control
    • Operating Voltage: 3.0V – 3.6V (Recommended: 3.3V)
    • Average Current Consumption: 80mA
    • Operating Temperature: -40°C to 125°C

    PCB Size: 25mm × 16mm

    Read moreDone
  • ESP32 38Pin Development Board WiFi+Bluetooth

    ESP32 38Pin Development Board WiFi+Bluetooth

    0 out of 5
    ₹400

    Specifications:

    • 4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
    • Ultra-Low power consumption works perfectly with the IDE
    • Support LWIP protocol, Freertos
    • Support Three Modes: AP, STA, and AP+STA
    • ESP 32 is safe, reliable, and scalable to a variety of applications
    Add to cartDone
  • ESP32 CAM WiFi Module Bluetooth Camera Module 2MP For DIY

    ESP32 CAM WiFi Module Bluetooth Camera Module 2MP For DIY

    0 out of 5
    ₹550

    Specifications:

    • Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
    • Low-Power Dual-core 32-bit CPU for application processors
    • Up to 240MHz, up to 600 DMIPS
    • Built-in 520 KB SRAM, external 4M PSRAM
    • Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
    • Support OV2640 and OV7670 cameras with built-in flash
    • Support for images Wi-Fi upload
    • Support TF card
    Buy ProductDone
  • FR2 A Grade Material (140 x 90 mm) - Single Sided PCB

    FR2 A Grade Material (140 x 90 mm) – Single Sided PCB

    0 out of 5
    ₹45

    Specifications:

    • Type: Phenolic (FR2) Material
    • Copper Layer Laminated
    • Easy for Soldering
    • Size: 140 mm x 90 mm
    Add to cartDone
  • LCD16x2 LCD Display Yellow Backlight

    LCD16x2 LCD Display Yellow Backlight

    0 out of 5
    ₹120

    Specifications

    • Display Mode: STN (Super Twisted Nematic)
    • Model: LCD1602
    • Character Format: 16 characters x 2 lines
    • Font Style: 5×8 dots per character
    • Power Supply: 5V ±10%
    • Backlight: Yellow
    • Dimensions: 80 x 36 x 10 (LxWxH) mm
    Add to cartDone
  • LM317 Voltage Regulator IC (Pack of 2)

    LM317 Voltage Regulator IC (Pack of 2)

    0 out of 5

    Specifications:

    • Input Voltage Range: 3V – 40V
    • Output Voltage Range: 1.25V – 37V
    • Maximum Output Current: 1.5A
    • Load Regulation: 0.1%
    • Line Regulation: 0.01%/V
    • Thermal Overload Protection: Yes
    • Short Circuit Protection: Yes
    • Mounting Type: Through-Hole (TO-220 Package)

    Applications:

    🔹 Adjustable Power Supplies
    🔹 Battery Chargers
    🔹 Constant Current Regulators
    🔹 DIY Electronics Projects
    🔹 Solar Power Regulation
    🔹 LED Driver Circuits

    Package Includes:

    📦 2 x LM317 Adjustable Voltage Regulator ICs

    Would you like any additional details or modifications? 😊

     

     

    2N2222 NPN Transistor (Pack of 20)

    The 2N2222 is a widely used NPN bipolar junction transistor (BJT) designed for low-power switching and amplification applications. It is known for its fast switching speed, low saturation voltage, and reliability, making it a favorite among electronics enthusiasts and professionals.

    Features:

    ✔ NPN Silicon BJT Transistor
    ✔ Low Saturation Voltage (VCE(sat))
    ✔ High-Speed Switching Capability
    ✔ Collector Current (IC) up to 800mA
    ✔ DC Current Gain (hFE) of 35 to 300
    ✔ Maximum Collector-Emitter Voltage: 40V
    ✔ Ideal for Switching & Amplification

    Specifications:

    • Transistor Type: NPN
    • Collector-Emitter Voltage (VCE): 40V
    • Collector-Base Voltage (VCB): 75V
    • Emitter-Base Voltage (VEB): 6V
    • Maximum Collector Current (IC): 800mA
    • DC Current Gain (hFE): 35 – 300
    • Power Dissipation (Ptot): 500mW
    • Transition Frequency (ft): 250 MHz
    • Mounting Type: Through-Hole (TO-92 Package)
    Read moreDone
  • LM35 Temperature Sensor

    LM35 Temperature Sensor

    0 out of 5
    ₹70

    Specifications:

    • Operating Voltage: 4V to 30V
    • Temperature Range: -55°C to +150°C
    • Output Voltage: 10mV per °C
    • Accuracy: ±0.5°C (at 25°C)
    • Power Consumption: 60 µA (Typical)
    • Response Time: Less than 1 second
    • Output Impedance: Low (less than 1Ω)
    • Package Type: TO-92 / SOIC-8
    Add to cartDone
  • Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    0 out of 5
    ₹250

    Specifications:

    • WiFi Module: ESP-12E
    • Processor: ESP8266
    • CP2102 Chip
    • Built-in Flash: 32Mbit
    • Antenna: Onboard PCB antenna
    • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
    • WiFi Protocol: IEEE 802.11 b/g/n
    • Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
    • WiFi Mode: Station / SoftAP / SoftAP Station
    • Power Supply: 5V
    • Logic Level: 3.3V
    Add to cartDone
  • Raspberry Pi Pico W

    Raspberry Pi Pico W

    0 out of 5
    ₹650

    Specifications:

    • Product: Raspberry Pi Pico W
    • Microcontroller: RP2040
    • Flash Memory: 2MB
    • Processor: Dual-core Cortex-M0+ (up to 133MHz)
    • On-board single-band 2.4GHz wireless interfaces (802.11n)
    • Micro USB B port for power and data
    • 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
    • 23 GPIO are digital-only, with three also being ADC capable
    Add to cartDone

End of content

End of content