Showing 21–30 of 30 results
Add to wishlist Compare Quick view
₹ 220
Specifications:
Wireless Standards: 802.11 b/g/n
Frequency Range: 2.4GHz – 2.5GHz
Data Interfaces: UART, HSPI, I2C, I2S, GPIO, PWM, IR Remote Control
Operating Voltage: 3.0V – 3.6V (Recommended: 3.3V)
Average Current Consumption: 80mA
Operating Temperature: -40°C to 125°C
PCB Size: 25mm × 16mm
Add to wishlist Compare Quick view
₹ 400
Specifications:
4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
Ultra-Low power consumption works perfectly with the IDE
Support LWIP protocol, Freertos
Support Three Modes: AP, STA, and AP+STA
ESP 32 is safe, reliable, and scalable to a variety of applications
Add to wishlist Compare Quick view
₹ 550
Specifications:
Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-Power Dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images Wi-Fi upload
Support TF card
Add to wishlist Compare Quick view
₹ 150
Specifications
Operating Supply Voltage: Up to 46V
Total DC Current: Up to 4A (2A per channel)
Logic Voltage: 5V
Drive Voltage: 5V – 35V
Logic Current: 0-36mA
Drive Current: 2A (max per bridge)
Maximum Power: 25W
Dimensions: 44 x 44 x 28 mm (LxWxH)
Weight: 26g
Add to wishlist Compare Quick view
₹ 250
Specifications:
WiFi Module: ESP-12E
Processor: ESP8266
CP2102 Chip
Built-in Flash: 32Mbit
Antenna: Onboard PCB antenna
Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
WiFi Protocol: IEEE 802.11 b/g/n
Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
WiFi Mode: Station / SoftAP / SoftAP Station
Power Supply: 5V
Logic Level: 3.3V
Add to wishlist Compare Quick view
₹ 650
Specifications:
Product: Raspberry Pi Pico W
Microcontroller: RP2040
Flash Memory: 2MB
Processor: Dual-core Cortex-M0+ (up to 133MHz)
On-board single-band 2.4GHz wireless interfaces (802.11n)
Micro USB B port for power and data
40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
23 GPIO are digital-only, with three also being ADC capable
Add to wishlist Compare Quick view
₹ 100
QUICK OVERVIEW:
All SD SPI pins output, MOSI, SCK, MISO, and CS.
Support 5V/3.3V input.
This module can handle 2GB SD cards.
Size:4.7 x 3.1 cm.
LED indicator.
SD Card Holder.
Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
Add to wishlist Compare Quick view
₹ 90
Specifications:
Universal for JR and FP connector § Cable length: 25cm
No load; Operating speed:
0.12 sec / 60 degree (4.8V),
0.10 sec / 60 degree (6.0V)
Temperature: -30~60’C
Dead band width: 5us
Add to wishlist Compare Quick view
₹ 200
Specifications:
Microcontroller: STM32F103C8T6
Core: ARM Cortex-M3 32-bit CPU
Operating Frequency: 72MHz
Flash Memory: 64KB
SRAM: 20KB
Power Supply: 2.0V – 3.6V
Debugging Interface: SWD (Serial Wire Debug)
Clock: 4-16MHz crystal
Dimensions: 54mm × 22mm
Weight: 9g
Add to wishlist Compare Quick view
₹ 32
Specifications:
Input voltage : 4.5V ~ 5.5V
Input Interface: Micro USB port
Charging method: linear charge
A full charge voltage: 4.2V
Power: 4.2 w
Charging accuracy: 1.5%
Operating Temperature: -10 to +85º C
Charging indicator: LED indicators for charging and full charging.
End of content
End of content
Load more