Showing 41–60 of 71 results

  • MAX7219 LED Dot Matrix

    MAX7219 LED Dot Matrix

    0 out of 5
    ₹230

    Specifications

    • Power Supply: 5V (via VCC pin)
    • Input/Output Control: Serial input/output
    • Driver Chip: MAX7219
    • LED Configuration: Supports 8×8 matrix or 8-digit 7-segment displays.
    • Input Current: 320 mA
    • PCB Dimensions: 50×32 mm (LxW)
    Add to cartDone
  • MAX7219 LED Dot Matrix 4-in-1 Display Module

    MAX7219 LED Dot Matrix 4-in-1 Display Module

    0 out of 5
    ₹490

    Specifications

    • Driver IC: MAX7219
    • Input Voltage: 5V
    • Maximum Operating Current: 320mA
    • LED Color: Red
    • LED Matrix Dimensions: 32×32×6mm (L×W×H)
    • PCB Size: 128×32mm (L×W)
    • Communication Interface: Serial (SPI-like protocol)
    Add to cartDone
  • MPU6050+ 3-axis Gyro + 3-axis Acceleration Sensor

    MPU6050+ 3-axis Gyro + 3-axis Acceleration Sensor

    0 out of 5
    ₹100

    Specifications:

    • 3-axis Gyro+Acceleration+Magnetic Field
    • Air Pressure Module
    • Power supply: 3-5V
    • Build in ultra low noise linear LDO voltage regulator
    • Built-in onboard filters, which reduce noise from motor and other high current electronics
    • You can easily select two I2C address for MPU6050 by soldered jumper

     

    Add to cartDone
  • MQ 135 Air Quality/Gas Detector Sensor Module For Arduino

    MQ 135 Air Quality/Gas Detector Sensor Module For Arduino

    0 out of 5
    ₹120

    Specifications:

    • Sensitivity to Ammonia, Sulphide and Benzene steam
    • Sensitive for benzene, alcohol, smoke
    • Fast response and recovery
    • Adjustable sensitivity
    • Signal output indicator
    • Output voltage boosts along with the concentration of the measured gases increases.
    Add to cartDone
  • MQ-2 Gas Sensor Module

    MQ-2 Gas Sensor Module

    0 out of 5
    ₹120

    📌 Specifications

    🔹 Gas Detection: LPG, methane, hydrogen, propane, carbon monoxide, alcohol
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~20 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

    Add to cartDone
  • MQ-3 Alcohol Sensor Module

    MQ-3 Alcohol Sensor Module

    0 out of 5
    ₹120

    📌 Specifications

    🔹 Gas Detection: Alcohol, ethanol vapors
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~20 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

    Add to cartDone
  • MQ-5 Methane LPG Liquid Propane Gas Sensor Module

    MQ-5 Methane LPG Liquid Propane Gas Sensor Module

    0 out of 5
    ₹120

    Specifications:

    • Operating Voltage: 5V DC
    • High sensitivity to LPG, natural gas, town gas.
    • Small sensitivity to alcohol, smoke.
    • Stable and long life.
    • Simple drive circuit.
    • Fast response
    Add to cartDone
  • MQ-6 Gas Sensor Module

    MQ-6 Gas Sensor Module

    0 out of 5
    ₹130

    📌 Specifications

    🔹 Gas Detection: LPG, isobutane, propane
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~20 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

    Add to cartDone
  • MQ-7 Carbon Monoxide (CO) Gas Sensor Module

    MQ-7 Carbon Monoxide (CO) Gas Sensor Module

    0 out of 5
    ₹130

    📌 Specifications

    🔹 Gas Detection: Carbon Monoxide (CO)
    🔹 Operating Voltage: 5V DC
    🔹 Power Consumption: ~150mA
    🔹 Analog Output (AO): 0-5V
    🔹 Digital Output (DO): High/Low signal (threshold adjustable)
    🔹 Preheat Time: ~60 seconds
    🔹 Response Time: <10 seconds
    🔹 Operating Temperature: -10°C to 50°C
    🔹 Dimensions: 32mm x 22mm x 27mm

    Add to cartDone
  • MT8870 DTMF Audio/Speech Decoding Telephone Module

    MT8870 DTMF Audio/Speech Decoding Telephone Module

    0 out of 5
    ₹130

    Specifications:

    • Main Chip: MT8870DS
    • Operating Voltage: 5V
    • Power Consumption: Max 500mW
    • Operating Temperature: -40°C to +85°C
    • Board Color: Blue
    • Dimensions: 27mm × 25mm × 10mm
    • Weight: 5g
    Add to cartDone
  • NEO-6M GPS Module with EPROM

    NEO-6M GPS Module with EPROM

    0 out of 5
    ₹280

    Features:

    • 5Hz position update rate.
    • The cold start time of 38 s and Hot start time of 1 s.
    • Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
    • SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
    • Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
    • Separated 18 x 18mm GPS antenna.
    Add to cartDone
  • Original Chip A4988 Stepper Motor Driver (Red) with Heatsink – 1.5A

    Original Chip A4988 Stepper Motor Driver (Red) with Heatsink – 1.5A

    0 out of 5
    ₹92

    Specifications

    Parameter Value
    Supply Voltage 8V – 35V
    Operating Current (Without Heatsink) 1A per phase
    Maximum Current (With Heatsink) 2A per phase
    Logic Voltage Input 3V – 5.5V
    Step Modes Full, ½, ¼, ⅛, 1/16
    Protection Features Thermal shutdown, UVLO, short circuit protection
    Additional Cooling Required for operation above 1A
    Add to cartDone
  • PIR Motion Sensor Detector Module HC-SR501

    PIR Motion Sensor Detector Module HC-SR501

    0 out of 5
    ₹80

    Specifications:

    • Wide Working Voltage Range: DC 4.5V- 20V
    • Current Drain: <60uA
    • Detection Angle: <140°
    • Detection Distance: 3 to 7m (can be adjusted)
    • Blockade time: 2.5s (Default)
    • Work temperature: -20- 80°C
    Add to cartDone
  • PL2303 – PL2303HX USB To TTL Serial UART Converter Module – 5 Pin

    PL2303 – PL2303HX USB To TTL Serial UART Converter Module – 5 Pin

    1.00 out of 5
    ₹75

    Features

    • High-Speed Controller: Utilizes the imported PL2303HX for stable, high-speed performance.
    • Built-in Protection: Equipped with a 500mA self-recovery fuse.
    • Data Monitoring: Includes dual data transmission indicators for real-time monitoring.
    • Voltage Compatibility: Provides 3.3V and 5V pin interfaces for versatile use.
    • Durable Design: Transparent heat-shrinkable sleeve for PCB insulation and short-circuit protection.
    • Electrostatic Safety: Packaged with electrostatic-proof wrapping to prevent damage.
    Add to cartDone
  • PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    0 out of 5
    ₹200

    The PT2272 4-Channel RF Remote Control is a wireless transmitter-receiver pair designed for remote-controlled applications such as toy cars, home automation, and short-distance wireless switching. Operating at +5V DC, it provides momentary operation, meaning that the output remains active only while the corresponding button is pressed. This RF module offers a 100-meter range in open…

    Add to cartDone
  • Raindrops Detection Sensor Module

    Raindrops Detection Sensor Module

    0 out of 5
    ₹55

    Specifications:

    • Operating voltage: 5V
    • Provide both digital and analog output
    • Adjustable sensitivity
    • Output LED indicator
    • Compatible with Arduino
    • TTL Compatible
    • Bolt holes for easy installation
    Add to cartDone
  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    ₹105

    Specifications:

    • Integrated RC522 IC
    • 13.56MHz Contactless Communication
    • Low Power Consumption
    • High-Speed Communication
    • SPI Interface
    • Compact and Lightweight
    Add to cartDone
  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    ₹150

    Specifications:

    🔹 Operating Voltage: 3.3V DC (5V tolerant with level shifters)
    🔹 Current Consumption: 13-26mA
    🔹 Frequency: 13.56 MHz
    🔹 Interface: SPI (default), I2C, UART
    🔹 Data Transfer Rate: 10 Mbps
    🔹 Reading Distance: Up to 5 cm
    🔹 Card Types Supported: MIFARE 1K, MIFARE 4K, Ultralight, DESFire, Plus
    🔹 Operating Temperature: -20°C to +80°C
    🔹 Dimensions: 60mm x 39mm

    Add to cartDone
  • RS232 to TTL Serial Port Converter DB9 MAX3232 Module

    RS232 to TTL Serial Port Converter DB9 MAX3232 Module

    0 out of 5
    ₹60

    📌 Specifications

    🔹 Chipset: MAX3232
    🔹 Operating Voltage: 3.3V – 5V DC
    🔹 Baud Rate: Up to 120kbps
    🔹 Communication Interface: RS232 (DB9) to TTL
    🔹 DB9 Connector Type: Male
    🔹 Logic Level: TTL (0V – 5V)
    🔹 Operating Temperature: -40°C to 85°C
    🔹 Module Dimensions: Compact and lightweight

    Add to cartDone
  • SD Card Reading Writing Module for Arduino

    SD Card Reading Writing Module for Arduino

    0 out of 5
    ₹110

    QUICK OVERVIEW:

    • All SD SPI pins output, MOSI, SCK, MISO, and CS.
    • Support 5V/3.3V input.
    • This module can handle 2GB SD cards.
    • Size:4.7  x 3.1 cm.
    • LED indicator.
    • SD Card Holder.
    • Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
    Add to cartDone

End of content

End of content