Showing 41–60 of 63 results
Add to wishlist Compare Quick view
₹ 490Specifications
Driver IC: MAX7219Input Voltage: 5VMaximum Operating Current: 320mALED Color: RedLED Matrix Dimensions: 32×32×6mm (L×W×H)PCB Size: 128×32mm (L×W)Communication Interface: Serial (SPI-like protocol)
Add to wishlist Compare Quick view
₹ 100Specifications:
3-axis Gyro+Acceleration+Magnetic Field
Air Pressure Module
Power supply: 3-5V
Build in ultra low noise linear LDO voltage regulator
Built-in onboard filters, which reduce noise from motor and other high current electronics
You can easily select two I2C address for MPU6050 by soldered jumper
Add to wishlist Compare Quick view
₹ 130Specifications:
Main Chip: MT8870DSOperating Voltage: 5VPower Consumption: Max 500mWOperating Temperature: -40°C to +85°CBoard Color: BlueDimensions: 27mm × 25mm × 10mmWeight: 5g
Add to wishlist Compare Quick view
₹ 350Features:
5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
Add to wishlist Compare Quick view
₹ 80Specifications:
Wide Working Voltage Range: DC 4.5V- 20V
Current Drain: <60uA
Detection Angle: <140°
Detection Distance: 3 to 7m (can be adjusted)
Blockade time: 2.5s (Default)
Work temperature: -20- 80°C
Add to wishlist Compare Quick view
₹ 75Features
High-Speed Controller : Utilizes the imported PL2303HX for stable, high-speed performance.Built-in Protection : Equipped with a 500mA self-recovery fuse.Data Monitoring : Includes dual data transmission indicators for real-time monitoring.Voltage Compatibility : Provides 3.3V and 5V pin interfaces for versatile use.Durable Design : Transparent heat-shrinkable sleeve for PCB insulation and short-circuit protection.Electrostatic Safety : Packaged with electrostatic-proof wrapping to prevent damage.
Add to wishlist Compare Quick view
₹ 70Specifications:
Operating voltage: 5V
Provide both digital and analog output
Adjustable sensitivity
Output LED indicator
Compatible with Arduino
TTL Compatible
Bolt holes for easy installation
Add to wishlist Compare Quick view
₹ 20Specifications:
Self-locking/Latching Self-reset
Good electrical conductivity
This is Momentary type push-button switch
Easy to use
Light Weight
Function: Momentary
Add to wishlist Compare Quick view
₹ 150Specifications:
Integrated RC522 IC
13.56MHz Contactless Communication
Low Power Consumption
High-Speed Communication
SPI Interface
Compact and Lightweight
Add to wishlist Compare Quick view
₹ 150Specifications:
🔹 Operating Voltage: 3.3V DC (5V tolerant with level shifters)Current Consumption: 13-26mAFrequency: 13.56 MHzInterface: SPI (default), I2C, UARTData Transfer Rate: 10 MbpsReading Distance: Up to 5 cmCard Types Supported: MIFARE 1K, MIFARE 4K, Ultralight, DESFire, PlusOperating Temperature: -20°C to +80°CDimensions: 60mm x 39mm
Add to wishlist Compare Quick view
₹ 60📌 Specifications
🔹 Chipset: MAX3232Operating Voltage: 3.3V – 5V DCBaud Rate: Up to 120kbpsCommunication Interface: RS232 (DB9) to TTLDB9 Connector Type: MaleLogic Level: TTL (0V – 5V)Operating Temperature: -40°C to 85°CModule Dimensions: Compact and lightweight
Add to wishlist Compare Quick view
₹ 100QUICK OVERVIEW:
All SD SPI pins output, MOSI, SCK, MISO, and CS.
Support 5V/3.3V input.
This module can handle 2GB SD cards.
Size:4.7 x 3.1 cm.
LED indicator.
SD Card Holder.
Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
Add to wishlist Compare Quick view
₹ 300Features:
GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
GPRS mobile station class B
Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
Supports Real Time Clock
Supply voltage range 3.4V ~ 4.4V
Supports A-GPS
Supports 3.0V to 5.0V logic level
Low power consumption, 1mA in sleep mode
Compact size 23mm x 35mm x 5.6mm
Micro SIM Card
Add to wishlist Compare Quick view
₹ 370Specifications
Operating Voltage: 2-3S LiPo BatteryCurrent Rating: 30A Continuous, 40A PeakBEC Output: 5V/2AStart Modes: Normal, Soft, Super-SoftCompatibility: Fixed-wing aircraft, helicopters, multi-rotorsSafety Features: Backward-polarity protection, 5V receiver line protectionHeat Management: Heat sink with thermal membraneProgrammability: Fully programmable via RC remote control
Add to wishlist Compare Quick view
₹ 10Specifications :
Material : Plastic and MetalVoltage Max : 50VCurrent Max : 0.5APositions : 2 (On/On)Terminal Pins : 3Contact Resistance : 20MΩ
Add to wishlist Compare Quick view
₹ 5Specifications:
Ideal for Through-hole applications.
Shaft Shape: Round
High precision mechanism design.
Compact and lightweight, easy to carry and dismantling.
Good electrical conductivity.
Dimensions: 6x6x5mmShaft Shape: Round
Add to wishlist Compare Quick view
₹ 420Specifications:
Operating Voltage: 3V-5V
High-resolution conversion of light intensity to frequency.
Chip pins all has drawn for standard 100.
Put the needle (2.54 mm).
Mil-convenient for bitmap board.
Programmable color and full-scale output frequency.
Communicate directly with a microcontroller.
Low-profile surface mount package.
Add to wishlist Compare Quick view
₹ 200Specifications
Model Number: TEC1-12706Operating Voltage: 12V DCMaximum Voltage (Umax): 15.4VMaximum Current (Imax): 6AMaximum Power: 92WMaximum Temperature: 138°CPower Cord Length: 200mm
Add to wishlist Compare Quick view
₹ 230Features:
Wide voltage power supply (6~30V)
Supports Micro USB 5.0V power supply
The interface is clear and simple, powerful, easy to understand
All set parameters automatically save power.
Add to wishlist Compare Quick view
₹ 90Specifications:
Driver Chip: TM1637Input Voltage: 3.7V – 5.3VInput Current: 30mADisplay Type: 7-Segment LEDDigit Count: 4LED Color: RedControl Interface: I2C-compatible (DIO & CLK)Pinout: GND, VCC, DIO, CLKMounting Holes: 4 × M2 screw positioning holesModule Dimensions: 42mm × 24mm × 12mm
End of content
End of content
Load more
