Showing all 14 results

  • 0.36inch 0-100V Three Wire LED Display Digital DC Voltmeter-RED

    0 out of 5
    ₹65 +Tax and Shipping.

    Specifications:

    • Operating Voltage: 4.5V-30V DC (Best performance: 5V-24V DC)
    • Measurement Range: 0-100V DC
    • Accuracy: ±0.1V
    • Current Consumption: <40mA
    • Refresh Speed: Approx. 200ms/time
    • Minimum Display Voltage: 3V (Accuracy improves above 3.6V)
    • LED Color: Red
    Add to cartDone

  • 3S 10A 12V 18650 Lithium Battery Charger Board Protection Module

    0 out of 5
    ₹80 +Tax and Shipping.

    Specifications:

    • Operating Current: 6-8A
    • Current Limit: 10-13A
    • Storage Temperature: -40°C to +80°C
    • Resting Current: < 30µA
    • Effective Lifetime: Over 30,000 hours
    • Internal Resistance: < 100mΩ
    • Short-Circuit Protection: Yes
    • Self-Recovery Delay: Yes
    Add to cartDone

  • 400 Points Solderless Breadboard

    0 out of 5
    ₹50 +Tax and Shipping.

    Specifications:

    • Size: 3.3 x 0.3 inches
    • Total 400 tie points
    • 400 tie in points
    • 10 rows
    • Hole Spacing: 2.54mm
    • Power Lanes: 2 power rails
    • Practical and useful
    Add to cartDone

  • 5V DC TOY Motor DIY

    0 out of 5
    ₹15 +Tax and Shipping.

    Specifications:

    • Nominal Operating Voltage: 5V
    • Operating Voltage Range: 3.0V to 6.0V
    • Nominal Voltage: 3V
    • No Load Current: 0.27A
    • Maximum Current: 1.05A
    • No Load Speed: 13,500 revolutions per minute (r/min)
    • Maximum Speed: 10,740 revolutions per minute (r/min)
    • Stall Torque: 68g.cm
    • Maximum Torque: 14g.cm
    • Stall Current: 4.10A
    Add to cartDone

  • 60 RPM BO Motor – (Single Shaft) Straight

    0 out of 5
    ₹55 +Tax and Shipping.

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Single D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 60 RPM
    • Rated Torque: 1 Kg/cm
    Add to cartDone

  • 65mm Robot Wheel for BO Motors (Yellow)

    0 out of 5
    ₹18 +Tax and Shipping.

    Specifications:

    • Loading Capacity (Kg): 2.5
    • D hole For BO Motor: 6 mm
    • Weight (gm): 34
    • Wheel Diameter(mm): 65 mm
    • ColorBlack (Tyre): Yellow (Rim)
    • Wheel Width 27 mm
    • Body Material Plastic
    • Grip Material Rubber
    • Center Shaft Hole Diameter
    • 4mm-(round side) and 3.5mm-(flat side)

     

    Add to cartDone

  • 9V Battery Snap Blue

    0 out of 5
    ₹5 +Tax and Shipping.

    Specifications:

    • It is an environmental 9V battery buckle.
    • Contacts Material: Brass, nickel-plated.
    • Wire Material: PVC-insulated copper.
    • Wire Ends: Stripped for easy connection.
    • Wire Length: 10cm.
    • Color: Blue.
    Add to cartDone

  • 9V HW Battery for Arduino/ DIY/ Robotics

    0 out of 5
    ₹22 +Tax and Shipping.

    Specifications:

    • Constant 9V Output till lasts
    • Metal Jacket Body
    • Good Built Quality and hence Leakproof
    • Easy to install and Replace
    • Corrosion free Connector Point for long-term use
    • 0% Mercury and Cadmium. Environment-friendly
    • OEM Compatible.
    Add to cartDone

  • BO Motor dual shaft 60 RPM – Straight

    0 out of 5
    ₹55 +Tax and Shipping.

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Double D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 150 RPM
    • Rated Torque: 0.35 Kgcm
    Add to cartDone

  • DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch

    0 out of 5
    ₹100 +Tax and Shipping.

    Specifications:

    • Working voltage: DC4.5V-35V
    • Output: 0-5A 90W
    • PWM duty cycle: 1% -100%
    • PWM frequency: 20KHz
    • Size: 30.5 * 26.5 * 13.5mm
    Add to cartDone

  • L298N Based Motor Driver Module

    0 out of 5
    ₹145 +Tax and Shipping.

    Specifications

    • Operating Supply Voltage: Up to 46V
    • Total DC Current: Up to 4A (2A per channel)
    • Logic Voltage: 5V
    • Drive Voltage: 5V – 35V
    • Logic Current: 0-36mA
    • Drive Current: 2A (max per bridge)
    • Maximum Power: 25W
    • Dimensions: 44 x 44 x 28 mm (LxWxH)
    • Weight: 26g
    Add to cartDone

  • Raspberry Pi Pico W

    0 out of 5
    ₹650 +Tax and Shipping.

    Specifications:

    • Product: Raspberry Pi Pico W
    • Microcontroller: RP2040
    • Flash Memory: 2MB
    • Processor: Dual-core Cortex-M0+ (up to 133MHz)
    • On-board single-band 2.4GHz wireless interfaces (802.11n)
    • Micro USB B port for power and data
    • 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
    • 23 GPIO are digital-only, with three also being ADC capable
    Add to cartDone

  • Servo SG90 9g 180 Degree

    0 out of 5
    ₹92 +Tax and Shipping.

    Specifications:

    • Universal for JR and FP connector § Cable length: 25cm
    • No load; Operating speed:

    0.12 sec / 60 degree (4.8V),

    0.10 sec / 60 degree (6.0V)

    • Temperature: -30~60’C
    • Dead band width: 5us
    Add to cartDone

  • TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB

    0 out of 5
    ₹32 +Tax and Shipping.

    Specifications:

    • Input voltage : 4.5V ~ 5.5V
    • Input Interface: Micro USB port
    • Charging method: linear charge
    • A full charge voltage: 4.2V
    • Power: 4.2 w
    • Charging accuracy: 1.5%
    • Operating Temperature: -10 to +85ºC
    • Charging indicator: LED indicators for charging and full charging.
    Add to cartDone

End of content

End of content