Showing all 10 results

  • Product on sale
    DAYS
    HRS
    MIN
    SEC

    1 Channel relay board

    5.00 out of 5
    Original price was: ₹260.Current price is: ₹255. +Tax and Shipping.

    Features:

    • Operating Voltage 5V
    • Max Current: 20mA
    • Relay Contact Current Capacity at AC250V: 10A.
    • Relay Contact Current Capacity at DC5V: 10A
    • Power supply indicator lamp
    • Control indicator lamp

     

    Add to cartDone

  • 5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable

    5.00 out of 5
    ₹210 +Tax and Shipping.

    QUICK OVERVIEW:

    1. Resolution: 5 MP
    2. Interface Type: CSI(Camera Serial Interface)
    3. Dimensions: 25x23x8 (LxWxH) mm
    4. Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
    5. Fully Compatible with Raspberry Pi 3 and 4 Model B
    6. Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
    Add to cartDone
  • Product on sale

    5V 2 Channel Relay Module

    5.00 out of 5
    Original price was: ₹240.Current price is: ₹230. +Tax and Shipping.

    Features:

    • Maximum switching voltage: 250VAC / 30VDC
    • Maximum switching current: 10A
    • Each relay features an LED indicator.
    • Dimensions: 51 x 39 x 18mm (Length x Width x Height)
    Add to cartDone
  • Product on sale

    5V 4 Channel Relay Module

    5.00 out of 5
    Original price was: ₹78.Current price is: ₹77. +Tax and Shipping.

    Features:

    • 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
    • Equipped with high-current relay, AC250V 10A; DC30V 10A.
    • Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
    • Indication LED’s for Relay output status.
    Add to cartDone

  • ARDUINO UNO Development Board DIP

    5.00 out of 5
    ₹490 +Tax and Shipping.

    Specifications:

    • Microcontroller ATmega328 DIP – Interface CH340G
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Digital I / O Pins 14
    • PWM output PINS: 6
    • Analog Input Pins: 6
    Add to cartDone
  • Product on sale

    Digital Sensor TTP223B Module Capacitive Touch Switch

    5.00 out of 5
    Original price was: ₹85.Current price is: ₹83. +Tax and Shipping.

    Specifications:

    • Power supply voltage(VCC): 2.0, 3, 5.5 V.
    • Output high VOH: 0.8VCC V
    • Output low VOL: 0.3VCC V
    • Response time (touch mode) : 60 mS
    • Response time (low power mode) : 220 mS
    • Can replace the traditional touch of a button
    • Four M2 screws positioning holes for easy installation
    Add to cartDone

  • ESP32 38Pin Development Board WiFi+Bluetooth

    5.00 out of 5
    ₹400 +Tax and Shipping.

    Specifications:

    • 4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
    • Ultra-Low power consumption works perfectly with the IDE
    • Support LWIP protocol, Freertos
    • Support Three Modes: AP, STA, and AP+STA
    • ESP 32 is safe, reliable, and scalable to a variety of applications
    Add to cartDone

  • HC-05 6pin Bluetooth Module with Button

    5.00 out of 5
    ₹280 +Tax and Shipping.

    Specifications:

    • Operating Voltage: DC 3.3V
    • Operating Current: 13-26mA
    • Idle Current: 10-13mA
    • Sleep Current: <80uA
    • Peak Current: <30mA
    • Frequency: 13.56MHz
    • Supported Card Types: MIFARE S50, S70, Ultralight, Pro, DESFire
    • Reader Distance: ≥50mm (with MIFARE 1 cards)
    • Data Transfer Rate: Up to 10Mbit/s
    • Operating Temperature: -20°C to 80°C
    • Storage Temperature: -40°C to 85°C
    • Humidity Range: 5% to 95% relative humidity
    • Module Dimensions: 40mm x 60mm
    Add to cartDone

  • IIC/I2C Serial Interface Adapter Module

    5.00 out of 5
    ₹190 +Tax and Shipping.

    Features:

    • 5V power supply.
    • Serial I2C control of LCD display using PCF8574.
    • Backlight can be enabled or disabled via a jumper on the board.
    • Contrast control via a potentiometer.
    • Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
    Add to cartDone

  • MPU6050+ 3-axis Gyro + 3-axis Acceleration Sensor

    5.00 out of 5
    ₹100 +Tax and Shipping.

    Specifications:

    • 3-axis Gyro+Acceleration+Magnetic Field
    • Air Pressure Module
    • Power supply: 3-5V
    • Build in ultra low noise linear LDO voltage regulator
    • Built-in onboard filters, which reduce noise from motor and other high current electronics
    • You can easily select two I2C address for MPU6050 by soldered jumper

     

    Add to cartDone

End of content

End of content