₹ 260 Original price was: ₹260. ₹ 255Current price is: ₹255. +Tax and Shipping.
Features:
Operating Voltage 5V
Max Current: 20mA
Relay Contact Current Capacity at AC250V: 10A.
Relay Contact Current Capacity at DC5V: 10A
Power supply indicator lamp
Control indicator lamp
Add to wishlist Compare Quick view
₹ 210 +Tax and Shipping.
QUICK OVERVIEW:
Resolution: 5 MP
Interface Type: CSI(Camera Serial Interface)
Dimensions: 25x23x8 (LxWxH) mm
Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
Fully Compatible with Raspberry Pi 3 and 4 Model B
Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
₹ 240 Original price was: ₹240. ₹ 230Current price is: ₹230. +Tax and Shipping.
Features:
Maximum switching voltage: 250VAC / 30VDC
Maximum switching current: 10A
Each relay features an LED indicator.
Dimensions: 51 x 39 x 18mm (Length x Width x Height)
₹ 78 Original price was: ₹78. ₹ 77Current price is: ₹77. +Tax and Shipping.
Features:
5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
Equipped with high-current relay, AC250V 10A; DC30V 10A.
Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Indication LED’s for Relay output status.
Add to wishlist Compare Quick view
₹ 150 +Tax and Shipping.
Specifications:
Supply Voltage: 4.5V ~ 5.5V DC
Measure Current Range: -20A ~ 20A
Sensitivity: 100mV/A
Add to wishlist Compare Quick view
₹ 240 +Tax and Shipping.
Specifications:
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
Add to wishlist Compare Quick view
₹ 490 +Tax and Shipping.
Specifications:
Microcontroller ATmega328 DIP – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Digital I / O Pins 14
PWM output PINS: 6
Analog Input Pins: 6
₹ 85 Original price was: ₹85. ₹ 83Current price is: ₹83. +Tax and Shipping.
Specifications:
Power supply voltage(VCC): 2.0, 3, 5.5 V.
Output high VOH: 0.8VCC V
Output low VOL: 0.3VCC V
Response time (touch mode) : 60 mS
Response time (low power mode) : 220 mS
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy installation
Add to wishlist Compare Quick view
₹ 400 +Tax and Shipping.
Specifications:
4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
Ultra-Low power consumption works perfectly with the IDE
Support LWIP protocol, Freertos
Support Three Modes: AP, STA, and AP+STA
ESP 32 is safe, reliable, and scalable to a variety of applications
Add to wishlist Compare Quick view
₹ 840 +Tax and Shipping.
Specifications:
Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-Power Dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images Wi-Fi upload
Support TF card
Add to wishlist Compare Quick view
₹ 280 +Tax and Shipping.
Specifications:
Operating Voltage: DC 3.3V
Operating Current: 13-26mA
Idle Current: 10-13mA
Sleep Current: <80uA
Peak Current: <30mA
Frequency: 13.56MHz
Supported Card Types: MIFARE S50, S70, Ultralight, Pro, DESFire
Reader Distance: ≥50mm (with MIFARE 1 cards)
Data Transfer Rate: Up to 10Mbit/s
Operating Temperature: -20°C to 80°C
Storage Temperature: -40°C to 85°C
Humidity Range: 5% to 95% relative humidity
Module Dimensions: 40mm x 60mm
Add to wishlist Compare Quick view
₹ 70 +Tax and Shipping.
Specifications:
Operating Voltage: 5V DC
Static Current: < 2mA
Output Signal: 5V TTL pulse
Detection Angle: < 15°
Detection Range: 2cm to 400cm
Precision: Up to 2mm
Input Trigger Signal: 10µs TTL pulse
Echo Signal: TTL pulse width proportional to distance
Add to wishlist Compare Quick view
₹ 190 +Tax and Shipping.
Features:
5V power supply.
Serial I2C control of LCD display using PCF8574.
Backlight can be enabled or disabled via a jumper on the board.
Contrast control via a potentiometer.
Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
Add to wishlist Compare Quick view
₹ 100 +Tax and Shipping.
Specifications:
3-axis Gyro+Acceleration+Magnetic Field
Air Pressure Module
Power supply: 3-5V
Build in ultra low noise linear LDO voltage regulator
Built-in onboard filters, which reduce noise from motor and other high current electronics
You can easily select two I2C address for MPU6050 by soldered jumper
Add to wishlist Compare Quick view
₹ 280 +Tax and Shipping.
Features:
5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
Add to wishlist Compare Quick view
₹ 75 +Tax and Shipping.
Features
High-Speed Controller : Utilizes the imported PL2303HX for stable, high-speed performance.
Built-in Protection : Equipped with a 500mA self-recovery fuse.
Data Monitoring : Includes dual data transmission indicators for real-time monitoring.
Voltage Compatibility : Provides 3.3V and 5V pin interfaces for versatile use.
Durable Design : Transparent heat-shrinkable sleeve for PCB insulation and short-circuit protection.
Electrostatic Safety : Packaged with electrostatic-proof wrapping to prevent damage.
Add to wishlist Compare Quick view
₹ 105 +Tax and Shipping.
Specifications:
Integrated RC522 IC
13.56MHz Contactless Communication
Low Power Consumption
High-Speed Communication
SPI Interface
Compact and Lightweight
Add to wishlist Compare Quick view
₹ 300 +Tax and Shipping.
Features:
GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
GPRS mobile station class B
Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
Supports Real Time Clock
Supply voltage range 3.4V ~ 4.4V
Supports A-GPS
Supports 3.0V to 5.0V logic level
Low power consumption, 1mA in sleep mode
Compact size 23mm x 35mm x 5.6mm
Micro SIM Card
End of content
End of content