“ARDUINO UNO Development Board DIP” has been added to your cart.
View cart
“400 Points Solderless Breadboard” has been added to your cart.
View cart
Add to wishlist Compare Quick view
₹ 65Specifications :
Operating Voltage : 4.5V-30V DC (Best performance: 5V-24V DC)Measurement Range : 0-100V DCAccuracy : ±0.1VCurrent Consumption : <40mARefresh Speed : Approx. 200ms/timeMinimum Display Voltage : 3V (Accuracy improves above 3.6V)LED Color : Red
Add to wishlist Compare Quick view
₹ 70Specifications:
Model No.: ICR18650-22C
Capacity (mAh): 2200
Output Voltage: 3.7V
Charge Rate: 3C
High energy density
High working voltage for single battery cells.
Pollution-free
Long cycle life
Add to wishlist Compare Quick view
₹ 80Specifications:
Over Charge Voltage Range: 4.25-4.35 V + 0.05 V
Over Voltage Range: 2.5-3.0 V + 0.05 V
Max. Operating Current: 13 A
Max. Limiting Current: 20 A
Charging Voltage: 8.4-9 V
Add to wishlist Compare Quick view
₹ 80Specifications:
Operating Current: 6-8ACurrent Limit: 10-13AStorage Temperature: -40°C to +80°CResting Current: < 30µAEffective Lifetime: Over 30,000 hoursInternal Resistance: < 100mΩShort-Circuit Protection: YesSelf-Recovery Delay: Yes
Add to wishlist Compare Quick view
₹ 50Specifications:
Size: 3.3 x 0.3 inches
Total 400 tie points
400 tie in points
10 rows
Hole Spacing: 2.54mmPower Lanes: 2 power railsPractical and useful
Add to wishlist Compare Quick view
₹ 15Specifications:
Nominal Operating Voltage: 5V
Operating Voltage Range: 3.0V to 6.0V
Nominal Voltage: 3V
No Load Current: 0.27A
Maximum Current: 1.05A
No Load Speed: 13,500 revolutions per minute (r/min)
Maximum Speed: 10,740 revolutions per minute (r/min)
Stall Torque: 68g.cm
Maximum Torque: 14g.cm
Stall Current: 4.10A
Add to wishlist Compare Quick view
₹ 60Specifications:
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Single D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 60 RPM
Rated Torque: 1 Kg/cm
Add to wishlist Compare Quick view
₹ 20Specifications:
Loading Capacity (Kg): 2.5
D hole For BO Motor: 6 mm
Weight (gm): 34
Wheel Diameter(mm): 65 mm
ColorBlack (Tyre): Yellow (Rim)
Wheel Width 27 mm
Body Material Plastic
Grip Material Rubber
Center Shaft Hole Diameter
4mm-(round side) and 3.5mm-(flat side)
Add to wishlist Compare Quick view
₹ 15Specifications:
Input Voltage(Max.) : 12V
Resistance: 120 Ω
Resonance Frequency: 2048 Hz
Sound Pressure(dB(A)/10cm)min.: 80
Maximum Current : 30mA/12VDC
Operating Temperature : -20 to 70 C
Pin Pitch: 6mm
External Material: Plastic;
Color: Black
Add to wishlist Compare Quick view
₹ 5Specifications:
It is an environmental 9V battery buckle.
Contacts Material: Brass, nickel-plated.Wire Material: PVC-insulated copper.Wire Ends: Stripped for easy connection.Wire Length: 10cm.
Color: Blue.
Add to wishlist Compare Quick view
₹ 25Specifications:
Constant 9V Output till lasts
Metal Jacket Body
Good Built Quality and hence Leakproof
Easy to install and Replace
Corrosion free Connector Point for long-term use
0% Mercury and Cadmium. Environment-friendly
OEM Compatible.
Add to wishlist Compare Quick view
₹ 60Specifications:
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Double D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 150 RPM
Rated Torque: 0.35 Kgcm
Add to wishlist Compare Quick view
₹ 80Specifications:
Working voltage: DC4.5V-35V
Output: 0-5A 90W
PWM duty cycle: 1% -100%
PWM frequency: 20KHz
Size: 30.5 * 26.5 * 13.5mm
Add to wishlist Compare Quick view
₹ 45Specifications:
Type: Phenolic (FR2) MaterialCopper Layer Laminated
Easy for Soldering
Size: 140 mm x 90 mm
Add to wishlist Compare Quick view
₹ 150Specifications
Operating Supply Voltage: Up to 46VTotal DC Current: Up to 4A (2A per channel)Logic Voltage: 5VDrive Voltage: 5V – 35VLogic Current: 0-36mADrive Current: 2A (max per bridge)Maximum Power: 25WDimensions: 44 x 44 x 28 mm (LxWxH)Weight: 26g
₹ 120Original price was: ₹120. ₹ 70Current price is: ₹70. Specifications Parameter Details:
Input Voltage Range:3V to 40V
Output Voltage Range: 1.5V to 35V (adjustable)
Output Current Rated: 2A, Max: 3A (requires heatsink)
Switching Frequency 150kHz Efficiency Up to 92% (depending on conditions)
Load Regulation ±0.5%
Voltage Regulation ±0.5%
Dynamic Response Speed 5% at 200µs
Operating Temperature -40°C to +85°C (industrial grade)
Add to wishlist Compare Quick view
₹ 650Specifications:
Product: Raspberry Pi Pico WMicrocontroller: RP2040Flash Memory: 2MBProcessor: Dual-core Cortex-M0+ (up to 133MHz)
On-board single-band 2.4GHz wireless interfaces (802.11n)
Micro USB B port for power and data
40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
23 GPIO are digital-only, with three also being ADC capable
Add to wishlist Compare Quick view
₹ 90Specifications:
Universal for JR and FP connector § Cable length: 25cm
No load; Operating speed:
0.12 sec / 60 degree (4.8V),
0.10 sec / 60 degree (6.0V)
Temperature: -30~60’C
Dead band width: 5us
Add to wishlist Compare Quick view
₹ 32Specifications:
Input voltage : 4.5V ~ 5.5V
Input Interface: Micro USB port
Charging method: linear charge
A full charge voltage: 4.2V
Power: 4.2 w
Charging accuracy: 1.5%
Operating Temperature: -10 to +85º C
Charging indicator: LED indicators for charging and full charging.
End of content
End of content
3 Pin Screw Type PCB Terminal Block – 5mm Pitch (Pack of 2)
1 × ₹18 
Token Number System
1 × ₹6,500 
Node MCU ESP8266 with CP2102 Wi-Fi Development Board
1 × ₹250 
ARDUINO UNO Development Board DIP
1 × ₹480 
