DIY BOARDS
SENSORS
MODULES
WIDE RANGE OF SHOP NOW

Showing 1–20 of 21 results

  • 5V DC TOY Motor DIY

    5V DC TOY Motor DIY

    0 out of 5
    15

    Specifications:

    • Nominal Operating Voltage: 5V
    • Operating Voltage Range: 3.0V to 6.0V
    • Nominal Voltage: 3V
    • No Load Current: 0.27A
    • Maximum Current: 1.05A
    • No Load Speed: 13,500 revolutions per minute (r/min)
    • Maximum Speed: 10,740 revolutions per minute (r/min)
    • Stall Torque: 68g.cm
    • Maximum Torque: 14g.cm
    • Stall Current: 4.10A
  • 60 RPM BO Motor – (Single Shaft) Straight

    60 RPM BO Motor – (Single Shaft) Straight

    0 out of 5
    55

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Single D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 60 RPM
    • Rated Torque: 1 Kg/cm
  • 65mm Robot Wheel for BO Motors (Yellow)

    65mm Robot Wheel for BO Motors (Yellow)

    0 out of 5
    18

    Specifications:

    • Loading Capacity (Kg): 2.5
    • D hole For BO Motor: 6 mm
    • Weight (gm): 34
    • Wheel Diameter(mm): 65 mm
    • ColorBlack (Tyre): Yellow (Rim)
    • Wheel Width 27 mm
    • Body Material Plastic
    • Grip Material Rubber
    • Center Shaft Hole Diameter
    • 4mm-(round side) and 3.5mm-(flat side)

     

  • BO Motor dual shaft 60 RPM – Straight

    BO Motor dual shaft 60 RPM – Straight

    0 out of 5
    55

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Double D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 150 RPM
    • Rated Torque: 0.35 Kgcm
  • DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch

    DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch

    0 out of 5
    100

    Specifications:

    • Working voltage: DC4.5V-35V
    • Output: 0-5A 90W
    • PWM duty cycle: 1% -100%
    • PWM frequency: 20KHz
    • Size: 30.5 * 26.5 * 13.5mm
  • ENC28J60 Ethernet Module (10 Pin Package: SSOP)

    ENC28J60 Ethernet Module (10 Pin Package: SSOP)

    0 out of 5
    350

    Specifications

    Parameter Value
    Ethernet Standard 10Base-T
    Communication Interface SPI (Serial Peripheral Interface)
    Max SPI Clock Speed 20MHz
    Crystal Oscillator 25MHz
    Ethernet Port HanRun HR911105A
    Supply Voltage 3.3V (5V-tolerant inputs)
    Operating Current ~180mA
    Board Dimensions 57mm × 34mm × 16mm
    Weight 14g
  • GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control

    GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control

    0 out of 5
    160

    Specifications

    • Operating Voltage: 4.8V – 6V DC
    • Output Current: 15mA (5.0V)
    • Output Signal: 1.5ms ± 0.5ms
    • Knob Diameter: 12mm
    • Dimensions: 35×30×15mm (L×W×H)
    • Weight: 8g
    • Shipping Weight: 12g
    • Shipping Dimensions: 6 × 4 × 3 cm
    • Color: Blue
  • GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control

    GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control

    0 out of 5
    160

    📌 Specifications

    🔹 Operating Voltage: 4.8V – 6V DC
    🔹 Output Current: 15mA (5.0V)
    🔹 Output Signal: 1.5ms ± 0.5ms
    🔹 Dimensions: 35mm x 30mm x 15mm
    🔹 Knob Diameter: 12mm
    🔹 Weight: 8g
    🔹 Color: Blue

  • HC-05 6pin Bluetooth Module with Button

    HC-05 6pin Bluetooth Module with Button

    5.00 out of 5
    280

    Specifications:

    • Operating Voltage: DC 3.3V
    • Operating Current: 13-26mA
    • Idle Current: 10-13mA
    • Sleep Current: <80uA
    • Peak Current: <30mA
    • Frequency: 13.56MHz
    • Supported Card Types: MIFARE S50, S70, Ultralight, Pro, DESFire
    • Reader Distance: ≥50mm (with MIFARE 1 cards)
    • Data Transfer Rate: Up to 10Mbit/s
    • Operating Temperature: -20°C to 80°C
    • Storage Temperature: -40°C to 85°C
    • Humidity Range: 5% to 95% relative humidity
    • Module Dimensions: 40mm x 60mm
  • HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module

    HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module

    0 out of 5
    420

    📌 Pin Description

    🔹 VCC – Power input (3.3V–5V)
    🔹 GND – Ground
    🔹 TXD – UART Transmit
    🔹 RXD – UART Receive
    🔹 STATE – Internal LED status pin (optional)
    🔹 BRK – Disconnect Bluetooth connection (optional)

  • L298N Based Motor Driver Module

    L298N Based Motor Driver Module

    0 out of 5
    145

    Specifications

    • Operating Supply Voltage: Up to 46V
    • Total DC Current: Up to 4A (2A per channel)
    • Logic Voltage: 5V
    • Drive Voltage: 5V – 35V
    • Logic Current: 0-36mA
    • Drive Current: 2A (max per bridge)
    • Maximum Power: 25W
    • Dimensions: 44 x 44 x 28 mm (LxWxH)
    • Weight: 26g
  • Original Chip A4988 Stepper Motor Driver (Red) with Heatsink – 1.5A

    Original Chip A4988 Stepper Motor Driver (Red) with Heatsink – 1.5A

    0 out of 5
    92

    Specifications

    Parameter Value
    Supply Voltage 8V – 35V
    Operating Current (Without Heatsink) 1A per phase
    Maximum Current (With Heatsink) 2A per phase
    Logic Voltage Input 3V – 5.5V
    Step Modes Full, ½, ¼, ⅛, 1/16
    Protection Features Thermal shutdown, UVLO, short circuit protection
    Additional Cooling Required for operation above 1A
  • PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    0 out of 5
    200

    The PT2272 4-Channel RF Remote Control is a wireless transmitter-receiver pair designed for remote-controlled applications such as toy cars, home automation, and short-distance wireless switching. Operating at +5V DC, it provides momentary operation, meaning that the output remains active only while the corresponding button is pressed. This RF module offers a 100-meter range in open…

  • RFID 13.56MHz Card (Pack of 2)

    RFID 13.56MHz Card (Pack of 2)

    0 out of 5
    45

    Specifications:

    🔹 Type: RFID Contactless Smart Card
    🔹 Chip Type: MIFARE 1K (or similar)
    🔹 Operating Frequency: 13.56MHz
    🔹 Protocol: ISO 14443A
    🔹 Storage Capacity: 1KB EEPROM
    🔹 Reading Distance: Up to 10cm (varies by reader)
    🔹 Material: PVC plastic
    🔹 Dimensions: 85.6 x 54 mm (Standard Credit Card Size)
    🔹 Color: White
    🔹 Weight: Approx. 6g per card

  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    105

    Specifications:

    • Integrated RC522 IC
    • 13.56MHz Contactless Communication
    • Low Power Consumption
    • High-Speed Communication
    • SPI Interface
    • Compact and Lightweight
  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    150

    Specifications:

    🔹 Operating Voltage: 3.3V DC (5V tolerant with level shifters)
    🔹 Current Consumption: 13-26mA
    🔹 Frequency: 13.56 MHz
    🔹 Interface: SPI (default), I2C, UART
    🔹 Data Transfer Rate: 10 Mbps
    🔹 Reading Distance: Up to 5 cm
    🔹 Card Types Supported: MIFARE 1K, MIFARE 4K, Ultralight, DESFire, Plus
    🔹 Operating Temperature: -20°C to +80°C
    🔹 Dimensions: 60mm x 39mm

  • RS232 to TTL Serial Port Converter DB9 MAX3232 Module

    RS232 to TTL Serial Port Converter DB9 MAX3232 Module

    0 out of 5
    60

    📌 Specifications

    🔹 Chipset: MAX3232
    🔹 Operating Voltage: 3.3V – 5V DC
    🔹 Baud Rate: Up to 120kbps
    🔹 Communication Interface: RS232 (DB9) to TTL
    🔹 DB9 Connector Type: Male
    🔹 Logic Level: TTL (0V – 5V)
    🔹 Operating Temperature: -40°C to 85°C
    🔹 Module Dimensions: Compact and lightweight

  • Servo SG90 9g 180 Degree

    Servo SG90 9g 180 Degree

    0 out of 5
    92

    Specifications:

    • Universal for JR and FP connector § Cable length: 25cm
    • No load; Operating speed:

    0.12 sec / 60 degree (4.8V),

    0.10 sec / 60 degree (6.0V)

    • Temperature: -30~60’C
    • Dead band width: 5us
  • SimonK 30A BLDC ESC Electronic Speed Controller

    SimonK 30A BLDC ESC Electronic Speed Controller

    0 out of 5
    370

    Specifications

    • Operating Voltage: 2-3S LiPo Battery
    • Current Rating: 30A Continuous, 40A Peak
    • BEC Output: 5V/2A
    • Start Modes: Normal, Soft, Super-Soft
    • Compatibility: Fixed-wing aircraft, helicopters, multi-rotors
    • Safety Features: Backward-polarity protection, 5V receiver line protection
    • Heat Management: Heat sink with thermal membrane
    • Programmability: Fully programmable via RC remote control
  • Submersible Mini Water Pump 3-6V DC

    Submersible Mini Water Pump 3-6V DC

    0 out of 5
    50

    Specifications:

    • Operating Voltage: 2.5 ~ 6V
    • Operating Current: 130 ~ 220mA
    • Flow Rate: 80 ~ 120 L/H
    • Maximum Lift: 40 ~ 110 mm
    • Outlet Outside Diameter: 7.5 mm
    • Outlet Inside Diameter: 5 mm

End of content

End of content