DIY BOARDS
SENSORS
MODULES WIDE RANGE OF SHOP NOW

Showing 1–20 of 24 results

  • 5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable

    5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable

    0 out of 5
    ₹210

    QUICK OVERVIEW:

    1. Resolution: 5 MP
    2. Interface Type: CSI(Camera Serial Interface)
    3. Dimensions: 25x23x8 (LxWxH) mm
    4. Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
    5. Fully Compatible with Raspberry Pi 3 and 4 Model B
    6. Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
    Add to cartDone
  • Arduino Joystick Module – Dual Axis with Push Button

    Arduino Joystick Module – Dual Axis with Push Button

    0 out of 5
    ₹70

    Specifications

    Parameter Details
    Operating Voltage 5V
    Interface 2.54mm pin leads
    Potentiometer Resistance 10kΩ
    Output Type Analog signals (X and Y axes)
    Switch Built-in pressable switch
    Compatibility Arduino, Raspberry Pi, and other microcontrollers
    Add to cartDone
  • Arduino Mega 2560 R3 – High-Performance Microcontroller Board

    Arduino Mega 2560 R3 – High-Performance Microcontroller Board

    0 out of 5
    ₹1,600

    Technical Specifications

    Specification Details
    Microcontroller ATmega2560
    Operating Voltage 5V
    Input Voltage (Recommended) 7-12V
    Input Voltage (Limits) 6-20V
    Digital I/O Pins 54 (15 PWM)
    Analog Input Pins 16
    DC Current per I/O Pin 40mA
    DC Current for 3.3V Pin 50mA
    Flash Memory 256KB (8KB used by bootloader)
    SRAM 8KB
    EEPROM 4KB
    Clock Speed 16 MHz
    USB Host Chip MAX3421E
    Dimensions (LxWxH) 101.98mm x 53.63mm x 15.29mm
    Weight 35g
    Add to cartDone
  • Arduino Nano Board R3 CH340 chip

    Arduino Nano Board R3 CH340 chip

    0 out of 5
    ₹240

    Specifications:

    • Operating Voltage (logic level): 5V
    • 8 analog inputs ports: A0 ~ A7
    • 14 Digital input / output ports: TX, RX, D2 ~ D13
    • 1 pair of TTL level serial transceiver ports RX / TX
    • Using Atmel Atmega328P-AU MCU
    • There is a bootloader installed in it
    • Standard 0.1” spacing DIP (breadboard friendly).
    • Manual reset switch.
    Add to cartDone
  • ARDUINO UNO Development Board DIP

    ARDUINO UNO Development Board DIP

    5.00 out of 5
    ₹490

    Specifications:

    • Microcontroller ATmega328 DIP – Interface CH340G
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Digital I / O Pins 14
    • PWM output PINS: 6
    • Analog Input Pins: 6
    Add to cartDone
  • ATmega328P-U Microcontroller – 8-bit MCU for Embedded Systems & IoT

    ATmega328P-U Microcontroller – 8-bit MCU for Embedded Systems & IoT

    0 out of 5
    ₹390

    Specifications:

    Specification Details
    Microcontroller Type 8-bit ATmega328P
    I/O Pins 23
    Timers 3 (8-bit/16-bit)
    Clock Frequency Up to 20 MHz
    Program Memory 32KB Flash
    RAM 2KB SRAM
    EEPROM 1024 Bytes
    Interfaces I2C, SPI, USART
    Operating Voltage 2.7V – 5.5V
    Temperature Range -24°C to 84°C
    Dimensions (LxWxH) 34.8 x 7.5 x 4.57 mm
    Package Type Through-Hole (DIP)
    Add to cartDone
  • Digispark ATTINY85 USB Development Board

    Digispark ATTINY85 USB Development Board

    0 out of 5
    ₹250

    Specifications:

    • Microcontroller: ATtiny85
    • Interface: USB
    • Development Environment: Arduino IDE
    • I/O Pins: 6 (digital, analog, PWM configurable)
    • PWM Outputs: 3 (expandable via software PWM)
    • Analog Inputs: 4
    • Communication: I2C, SPI (via USI)
    • Power Supply: USB or 6V – 35V DC
    • Onboard Regulator: 150mA, 5V
    • Size: Ultra-compact for space-constrained projects
    Add to cartDone
  • ECG Module AD8232 Heart ECG Monitoring Sensor Kit for Arduino

    ECG Module AD8232 Heart ECG Monitoring Sensor Kit for Arduino

    0 out of 5
    ₹690

    Specifications

    Parameter Value
    Operating Voltage 3.3V DC
    Analog Output Yes
    Temperature Range -40°C to 90°C
    Cable Length 50 cm
    Board Dimensions 36mm x 30mm x 18mm
    Weight 5g
    Connector Type 3.5mm Jack for ECG pads
    Add to cartDone
  • ENC28J60 Ethernet Module (10 Pin Package: SSOP)

    ENC28J60 Ethernet Module (10 Pin Package: SSOP)

    0 out of 5
    ₹350

    Specifications

    Parameter Value
    Ethernet Standard 10Base-T
    Communication Interface SPI (Serial Peripheral Interface)
    Max SPI Clock Speed 20MHz
    Crystal Oscillator 25MHz
    Ethernet Port HanRun HR911105A
    Supply Voltage 3.3V (5V-tolerant inputs)
    Operating Current ~180mA
    Board Dimensions 57mm × 34mm × 16mm
    Weight 14g
    Add to cartDone
  • ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    0 out of 5
    ₹120

    Specifications

    • Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
    • Protocol Stack: Integrated TCP/IP
    • Processor: Low-power 32-bit CPU
    • Communication Interfaces: SDIO 1.1/2.0, SPI, UART
    • Wireless Technologies: STBC, 1×1 MIMO, 2×1 MIMO
    • Flash Memory: 1MB (upgraded from 512KB)
    • GPIO Pins: 2 (for sensors and peripherals)
    • Wake-up Time: <2ms
    • Standby Power Consumption: <1.0mW (DTIM3)
    • Operating Voltage: 3.3V (requires logic level converter for 5V systems)
    • Compatibility: Arduino, Raspberry Pi, PIC, and other microcontrollers
    • Dimensions: Compact form factor
    Read moreDone
  • ESP-12E ESP8266 Serial Port WiFi Wireless Transceiver Module

    ESP-12E ESP8266 Serial Port WiFi Wireless Transceiver Module

    0 out of 5
    ₹220

    Specifications:

    • Wireless Standards: 802.11 b/g/n
    • Frequency Range: 2.4GHz – 2.5GHz
    • Data Interfaces: UART, HSPI, I2C, I2S, GPIO, PWM, IR Remote Control
    • Operating Voltage: 3.0V – 3.6V (Recommended: 3.3V)
    • Average Current Consumption: 80mA
    • Operating Temperature: -40°C to 125°C

    PCB Size: 25mm × 16mm

    Read moreDone
  • ESP32 38Pin Development Board WiFi+Bluetooth

    ESP32 38Pin Development Board WiFi+Bluetooth

    0 out of 5
    ₹400

    Specifications:

    • 4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
    • Ultra-Low power consumption works perfectly with the IDE
    • Support LWIP protocol, Freertos
    • Support Three Modes: AP, STA, and AP+STA
    • ESP 32 is safe, reliable, and scalable to a variety of applications
    Add to cartDone
  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization

    ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization

    0 out of 5
    ₹840

    Specifications:

    • Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
    • Low-Power Dual-core 32-bit CPU for application processors
    • Up to 240MHz, up to 600 DMIPS
    • Built-in 520 KB SRAM, external 4M PSRAM
    • Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
    • Support OV2640 and OV7670 cameras with built-in flash
    • Support for images Wi-Fi upload
    • Support TF card
    Buy ProductDone
  • HC-05 6pin Bluetooth Module with Button

    HC-05 6pin Bluetooth Module with Button

    5.00 out of 5
    ₹280

    Specifications:

    • Operating Voltage: DC 3.3V
    • Operating Current: 13-26mA
    • Idle Current: 10-13mA
    • Sleep Current: <80uA
    • Peak Current: <30mA
    • Frequency: 13.56MHz
    • Supported Card Types: MIFARE S50, S70, Ultralight, Pro, DESFire
    • Reader Distance: ≥50mm (with MIFARE 1 cards)
    • Data Transfer Rate: Up to 10Mbit/s
    • Operating Temperature: -20°C to 80°C
    • Storage Temperature: -40°C to 85°C
    • Humidity Range: 5% to 95% relative humidity
    • Module Dimensions: 40mm x 60mm
    Add to cartDone
  • HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module

    HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module

    0 out of 5
    ₹420

    📌 Pin Description

    🔹 VCC – Power input (3.3V–5V)
    🔹 GND – Ground
    🔹 TXD – UART Transmit
    🔹 RXD – UART Receive
    🔹 STATE – Internal LED status pin (optional)
    🔹 BRK – Disconnect Bluetooth connection (optional)

    Add to cartDone
  • Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    0 out of 5
    ₹280

    Specifications:

    • WiFi Module: ESP-12E
    • Processor: ESP8266
    • CP2102 Chip
    • Built-in Flash: 32Mbit
    • Antenna: Onboard PCB antenna
    • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
    • WiFi Protocol: IEEE 802.11 b/g/n
    • Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
    • WiFi Mode: Station / SoftAP / SoftAP Station
    • Power Supply: 5V
    • Logic Level: 3.3V
    Add to cartDone
  • PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    0 out of 5
    ₹200

    The PT2272 4-Channel RF Remote Control is a wireless transmitter-receiver pair designed for remote-controlled applications such as toy cars, home automation, and short-distance wireless switching. Operating at +5V DC, it provides momentary operation, meaning that the output remains active only while the corresponding button is pressed. This RF module offers a 100-meter range in open…

    Add to cartDone
  • Raspberry Pi Pico W

    Raspberry Pi Pico W

    0 out of 5
    ₹650

    Specifications:

    • Product: Raspberry Pi Pico W
    • Microcontroller: RP2040
    • Flash Memory: 2MB
    • Processor: Dual-core Cortex-M0+ (up to 133MHz)
    • On-board single-band 2.4GHz wireless interfaces (802.11n)
    • Micro USB B port for power and data
    • 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
    • 23 GPIO are digital-only, with three also being ADC capable
    Add to cartDone
  • RFID 13.56MHz Card (Pack of 2)

    RFID 13.56MHz Card (Pack of 2)

    0 out of 5
    ₹45

    Specifications:

    🔹 Type: RFID Contactless Smart Card
    🔹 Chip Type: MIFARE 1K (or similar)
    🔹 Operating Frequency: 13.56MHz
    🔹 Protocol: ISO 14443A
    🔹 Storage Capacity: 1KB EEPROM
    🔹 Reading Distance: Up to 10cm (varies by reader)
    🔹 Material: PVC plastic
    🔹 Dimensions: 85.6 x 54 mm (Standard Credit Card Size)
    🔹 Color: White
    🔹 Weight: Approx. 6g per card

    Add to cartDone
  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    ₹105

    Specifications:

    • Integrated RC522 IC
    • 13.56MHz Contactless Communication
    • Low Power Consumption
    • High-Speed Communication
    • SPI Interface
    • Compact and Lightweight
    Add to cartDone

End of content

End of content