Showing all 16 results

  • 5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable

    5.00 out of 5
    ₹210 +Tax and Shipping.

    QUICK OVERVIEW:

    1. Resolution: 5 MP
    2. Interface Type: CSI(Camera Serial Interface)
    3. Dimensions: 25x23x8 (LxWxH) mm
    4. Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
    5. Fully Compatible with Raspberry Pi 3 and 4 Model B
    6. Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
    Add to cartDone

  • Arduino Joystick Module – Dual Axis with Push Button

    0 out of 5
    ₹70 +Tax and Shipping.

    Specifications

    Parameter Details
    Operating Voltage 5V
    Interface 2.54mm pin leads
    Potentiometer Resistance 10kΩ
    Output Type Analog signals (X and Y axes)
    Switch Built-in pressable switch
    Compatibility Arduino, Raspberry Pi, and other microcontrollers
    Add to cartDone

  • Arduino Mega 2560 R3 – High-Performance Microcontroller Board

    0 out of 5
    ₹1,600 +Tax and Shipping.

    Technical Specifications

    Specification Details
    Microcontroller ATmega2560
    Operating Voltage 5V
    Input Voltage (Recommended) 7-12V
    Input Voltage (Limits) 6-20V
    Digital I/O Pins 54 (15 PWM)
    Analog Input Pins 16
    DC Current per I/O Pin 40mA
    DC Current for 3.3V Pin 50mA
    Flash Memory 256KB (8KB used by bootloader)
    SRAM 8KB
    EEPROM 4KB
    Clock Speed 16 MHz
    USB Host Chip MAX3421E
    Dimensions (LxWxH) 101.98mm x 53.63mm x 15.29mm
    Weight 35g
    Add to cartDone

  • Arduino Nano Board R3 CH340 chip

    4.00 out of 5
    ₹240 +Tax and Shipping.

    Specifications:

    • Operating Voltage (logic level): 5V
    • 8 analog inputs ports: A0 ~ A7
    • 14 Digital input / output ports: TX, RX, D2 ~ D13
    • 1 pair of TTL level serial transceiver ports RX / TX
    • Using Atmel Atmega328P-AU MCU
    • There is a bootloader installed in it
    • Standard 0.1” spacing DIP (breadboard friendly).
    • Manual reset switch.
    Add to cartDone

  • ARDUINO UNO Development Board DIP

    5.00 out of 5
    ₹490 +Tax and Shipping.

    Specifications:

    • Microcontroller ATmega328 DIP – Interface CH340G
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Digital I / O Pins 14
    • PWM output PINS: 6
    • Analog Input Pins: 6
    Add to cartDone

  • ATmega328P-U Microcontroller – 8-bit MCU for Embedded Systems & IoT

    0 out of 5
    ₹390 +Tax and Shipping.

    Specifications:

    Specification Details
    Microcontroller Type 8-bit ATmega328P
    I/O Pins 23
    Timers 3 (8-bit/16-bit)
    Clock Frequency Up to 20 MHz
    Program Memory 32KB Flash
    RAM 2KB SRAM
    EEPROM 1024 Bytes
    Interfaces I2C, SPI, USART
    Operating Voltage 2.7V – 5.5V
    Temperature Range -24°C to 84°C
    Dimensions (LxWxH) 34.8 x 7.5 x 4.57 mm
    Package Type Through-Hole (DIP)
    Add to cartDone

  • Digispark ATTINY85 USB Development Board

    0 out of 5
    ₹250 +Tax and Shipping.

    Specifications:

    • Microcontroller: ATtiny85
    • Interface: USB
    • Development Environment: Arduino IDE
    • I/O Pins: 6 (digital, analog, PWM configurable)
    • PWM Outputs: 3 (expandable via software PWM)
    • Analog Inputs: 4
    • Communication: I2C, SPI (via USI)
    • Power Supply: USB or 6V – 35V DC
    • Onboard Regulator: 150mA, 5V
    • Size: Ultra-compact for space-constrained projects
    Add to cartDone

  • ECG Module AD8232 Heart ECG Monitoring Sensor Kit for Arduino

    0 out of 5
    ₹690 +Tax and Shipping.

    Specifications

    Parameter Value
    Operating Voltage 3.3V DC
    Analog Output Yes
    Temperature Range -40°C to 90°C
    Cable Length 50 cm
    Board Dimensions 36mm x 30mm x 18mm
    Weight 5g
    Connector Type 3.5mm Jack for ECG pads
    Add to cartDone

  • ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

    0 out of 5
    ₹120 +Tax and Shipping.

    Specifications

    • Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
    • Protocol Stack: Integrated TCP/IP
    • Processor: Low-power 32-bit CPU
    • Communication Interfaces: SDIO 1.1/2.0, SPI, UART
    • Wireless Technologies: STBC, 1×1 MIMO, 2×1 MIMO
    • Flash Memory: 1MB (upgraded from 512KB)
    • GPIO Pins: 2 (for sensors and peripherals)
    • Wake-up Time: <2ms
    • Standby Power Consumption: <1.0mW (DTIM3)
    • Operating Voltage: 3.3V (requires logic level converter for 5V systems)
    • Compatibility: Arduino, Raspberry Pi, PIC, and other microcontrollers
    • Dimensions: Compact form factor
    Read moreDone

  • ESP-12E ESP8266 Serial Port WiFi Wireless Transceiver Module

    0 out of 5
    ₹220 +Tax and Shipping.

    Specifications:

    • Wireless Standards: 802.11 b/g/n
    • Frequency Range: 2.4GHz – 2.5GHz
    • Data Interfaces: UART, HSPI, I2C, I2S, GPIO, PWM, IR Remote Control
    • Operating Voltage: 3.0V – 3.6V (Recommended: 3.3V)
    • Average Current Consumption: 80mA
    • Operating Temperature: -40°C to 125°C

    PCB Size: 25mm × 16mm

    Read moreDone

  • ESP32 38Pin Development Board WiFi+Bluetooth

    5.00 out of 5
    ₹400 +Tax and Shipping.

    Specifications:

    • 4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
    • Ultra-Low power consumption works perfectly with the IDE
    • Support LWIP protocol, Freertos
    • Support Three Modes: AP, STA, and AP+STA
    • ESP 32 is safe, reliable, and scalable to a variety of applications
    Add to cartDone

  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization

    4.00 out of 5
    ₹840 +Tax and Shipping.

    Specifications:

    • Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
    • Low-Power Dual-core 32-bit CPU for application processors
    • Up to 240MHz, up to 600 DMIPS
    • Built-in 520 KB SRAM, external 4M PSRAM
    • Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
    • Support OV2640 and OV7670 cameras with built-in flash
    • Support for images Wi-Fi upload
    • Support TF card
    Buy ProductDone

  • Node MCU ESP8266 with CP2102 Wi-Fi Development Board

    0 out of 5
    ₹280 +Tax and Shipping.

    Specifications:

    • WiFi Module: ESP-12E
    • Processor: ESP8266
    • CP2102 Chip
    • Built-in Flash: 32Mbit
    • Antenna: Onboard PCB antenna
    • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
    • WiFi Protocol: IEEE 802.11 b/g/n
    • Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
    • WiFi Mode: Station / SoftAP / SoftAP Station
    • Power Supply: 5V
    • Logic Level: 3.3V
    Add to cartDone

  • Raspberry Pi Pico W

    0 out of 5
    ₹650 +Tax and Shipping.

    Specifications:

    • Product: Raspberry Pi Pico W
    • Microcontroller: RP2040
    • Flash Memory: 2MB
    • Processor: Dual-core Cortex-M0+ (up to 133MHz)
    • On-board single-band 2.4GHz wireless interfaces (802.11n)
    • Micro USB B port for power and data
    • 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
    • 23 GPIO are digital-only, with three also being ADC capable
    Add to cartDone

  • SD Card Reading Writing Module for Arduino

    0 out of 5
    ₹110 +Tax and Shipping.

    QUICK OVERVIEW:

    • All SD SPI pins output, MOSI, SCK, MISO, and CS.
    • Support 5V/3.3V input.
    • This module can handle 2GB SD cards.
    • Size:4.7  x 3.1 cm.
    • LED indicator.
    • SD Card Holder.
    • Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
    Add to cartDone

  • STM32F103C8T6 Minimum System Development Board

    0 out of 5
    ₹170 +Tax and Shipping.

    Specifications:

    • Microcontroller: STM32F103C8T6
    • Core: ARM Cortex-M3 32-bit CPU
    • Operating Frequency: 72MHz
    • Flash Memory: 64KB
    • SRAM: 20KB
    • Power Supply: 2.0V – 3.6V
    • Debugging Interface: SWD (Serial Wire Debug)
    • Clock: 4-16MHz crystal
    • Dimensions: 54mm × 22mm
    • Weight: 9g
    Read moreDone

End of content

End of content

Power up your electronics and IoT projects with our range of high-quality development boards. Whether you're a beginner or an advanced developer, we offer a variety of options, including Arduino Uno, Arduino Mega, ESP32, NodeMCU, and Raspberry Pi. These boards provide the perfect foundation for prototyping, automation, and embedded system applications. Build, innovate, and bring your ideas to life with ease!