Showing 41–60 of 151 results

  • NEO-6M GPS Module with EPROM

    4.00 out of 5
    280 +Tax and Shipping.

    Features:

    • 5Hz position update rate.
    • The cold start time of 38 s and Hot start time of 1 s.
    • Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
    • SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
    • Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
    • Separated 18 x 18mm GPS antenna.
  • Original Chip A4988 Stepper Motor Driver (Red) with Heatsink – 1.5A

    0 out of 5
    92 +Tax and Shipping.

    Specifications

    Parameter Value
    Supply Voltage 8V – 35V
    Operating Current (Without Heatsink) 1A per phase
    Maximum Current (With Heatsink) 2A per phase
    Logic Voltage Input 3V – 5.5V
    Step Modes Full, ½, ¼, ⅛, 1/16
    Protection Features Thermal shutdown, UVLO, short circuit protection
    Additional Cooling Required for operation above 1A
  • PIR Motion Sensor Detector Module HC-SR501

    0 out of 5
    80 +Tax and Shipping.

    Specifications:

    • Wide Working Voltage Range: DC 4.5V- 20V
    • Current Drain: <60uA
    • Detection Angle: <140°
    • Detection Distance: 3 to 7m (can be adjusted)
    • Blockade time: 2.5s (Default)
    • Work temperature: -20- 80°C
  • PL2303 – PL2303HX USB To TTL Serial UART Converter Module – 5 Pin

    4.00 out of 5
    75 +Tax and Shipping.

    Features

    • High-Speed Controller: Utilizes the imported PL2303HX for stable, high-speed performance.
    • Built-in Protection: Equipped with a 500mA self-recovery fuse.
    • Data Monitoring: Includes dual data transmission indicators for real-time monitoring.
    • Voltage Compatibility: Provides 3.3V and 5V pin interfaces for versatile use.
    • Durable Design: Transparent heat-shrinkable sleeve for PCB insulation and short-circuit protection.
    • Electrostatic Safety: Packaged with electrostatic-proof wrapping to prevent damage.
  • PT2272 – 4-Channel RF Remote Control – Transmitter Receiver Pair (Momentary)

    0 out of 5
    200 +Tax and Shipping.

    The PT2272 4-Channel RF Remote Control is a wireless transmitter-receiver pair designed for remote-controlled applications such as toy cars, home automation, and short-distance wireless switching. Operating at +5V DC, it provides momentary operation, meaning that the output remains active only while the corresponding button is pressed. This RF module offers a 100-meter range in open…

  • Raindrops Detection Sensor Module

    0 out of 5
    55 +Tax and Shipping.

    Specifications:

    • Operating voltage: 5V
    • Provide both digital and analog output
    • Adjustable sensitivity
    • Output LED indicator
    • Compatible with Arduino
    • TTL Compatible
    • Bolt holes for easy installation
  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    4.00 out of 5
    105 +Tax and Shipping.

    Specifications:

    • Integrated RC522 IC
    • 13.56MHz Contactless Communication
    • Low Power Consumption
    • High-Speed Communication
    • SPI Interface
    • Compact and Lightweight
  • RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

    0 out of 5
    150 +Tax and Shipping.

    Specifications:

    🔹 Operating Voltage: 3.3V DC (5V tolerant with level shifters)
    🔹 Current Consumption: 13-26mA
    🔹 Frequency: 13.56 MHz
    🔹 Interface: SPI (default), I2C, UART
    🔹 Data Transfer Rate: 10 Mbps
    🔹 Reading Distance: Up to 5 cm
    🔹 Card Types Supported: MIFARE 1K, MIFARE 4K, Ultralight, DESFire, Plus
    🔹 Operating Temperature: -20°C to +80°C
    🔹 Dimensions: 60mm x 39mm

  • RS232 to TTL Serial Port Converter DB9 MAX3232 Module

    0 out of 5
    60 +Tax and Shipping.

    📌 Specifications

    🔹 Chipset: MAX3232
    🔹 Operating Voltage: 3.3V – 5V DC
    🔹 Baud Rate: Up to 120kbps
    🔹 Communication Interface: RS232 (DB9) to TTL
    🔹 DB9 Connector Type: Male
    🔹 Logic Level: TTL (0V – 5V)
    🔹 Operating Temperature: -40°C to 85°C
    🔹 Module Dimensions: Compact and lightweight

  • SD Card Reading Writing Module for Arduino

    0 out of 5
    110 +Tax and Shipping.

    QUICK OVERVIEW:

    • All SD SPI pins output, MOSI, SCK, MISO, and CS.
    • Support 5V/3.3V input.
    • This module can handle 2GB SD cards.
    • Size:4.7  x 3.1 cm.
    • LED indicator.
    • SD Card Holder.
    • Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
  • SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port

    4.00 out of 5
    300 +Tax and Shipping.

    Features:

    • GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
    • GPRS mobile station class B
    • Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
    • Supports Real Time Clock
    • Supply voltage range 3.4V ~ 4.4V
    • Supports A-GPS
    • Supports 3.0V to 5.0V logic level
    • Low power consumption, 1mA in sleep mode
    • Compact size 23mm x 35mm x 5.6mm
    • Micro SIM Card
  • SimonK 30A BLDC ESC Electronic Speed Controller

    0 out of 5
    370 +Tax and Shipping.

    Specifications

    • Operating Voltage: 2-3S LiPo Battery
    • Current Rating: 30A Continuous, 40A Peak
    • BEC Output: 5V/2A
    • Start Modes: Normal, Soft, Super-Soft
    • Compatibility: Fixed-wing aircraft, helicopters, multi-rotors
    • Safety Features: Backward-polarity protection, 5V receiver line protection
    • Heat Management: Heat sink with thermal membrane
    • Programmability: Fully programmable via RC remote control
  • TCS3200 Colour Recognition Sensor Module

    0 out of 5
    430 +Tax and Shipping.

    Specifications:

    • Operating Voltage: 3V-5V
    • High-resolution conversion of light intensity to frequency.
    • Chip pins all has drawn for standard 100.
    • Put the needle (2.54 mm).
    • Mil-convenient for bitmap board.
    • Programmable color and full-scale output frequency.
    • Communicate directly with a microcontroller.
    • Low-profile surface mount package.
  • TEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module

    0 out of 5
    250 +Tax and Shipping.

    Specifications

    • Model Number: TEC1-12706
    • Operating Voltage: 12V DC
    • Maximum Voltage (Umax): 15.4V
    • Maximum Current (Imax): 6A
    • Maximum Power: 92W
    • Maximum Temperature: 138°C
    • Power Cord Length: 200mm
  • Timing Delay Switch Circuit with Double MOSFET Control

    0 out of 5
    230 +Tax and Shipping.

    Features:

    • Wide voltage power supply (6~30V)
    • Supports Micro USB 5.0V power supply
    • The interface is clear and simple, powerful, easy to understand
    • All set parameters automatically save power.
  • TM1637 4-Bit Digital Tube LED Display Module (Red)

    0 out of 5
    90 +Tax and Shipping.

    Specifications:

    • Driver Chip: TM1637
    • Input Voltage: 3.7V – 5.3V
    • Input Current: 30mA
    • Display Type: 7-Segment LED
    • Digit Count: 4
    • LED Color: Red
    • Control Interface: I2C-compatible (DIO & CLK)
    • Pinout: GND, VCC, DIO, CLK
    • Mounting Holes: 4 × M2 screw positioning holes
    • Module Dimensions: 42mm × 24mm × 12mm
  • TowerPro MG995 Metal Gear Servo Motor (180° Rotation)

    0 out of 5
    285 +Tax and Shipping.

    Specifications

    Parameter Value
    Model MG995
    Weight 55g
    Operating Voltage 4.8V – 7.2V
    Torque @ 4.8V 10kg/cm
    Torque @ 6.6V 12kg/cm
    Operating Speed @ 4.8V 0.20 sec/60°
    Operating Speed @ 6.6V 0.16 sec/60°
    Rotational Angle 180° (±90°)
    Dead Band Width 1 µs

     

  • TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB

    0 out of 5
    32 +Tax and Shipping.

    Specifications:

    • Input voltage : 4.5V ~ 5.5V
    • Input Interface: Micro USB port
    • Charging method: linear charge
    • A full charge voltage: 4.2V
    • Power: 4.2 w
    • Charging accuracy: 1.5%
    • Operating Temperature: -10 to +85ºC
    • Charging indicator: LED indicators for charging and full charging.

End of content

End of content