Showing all 13 results

  • 5V DC TOY Motor DIY

    0 out of 5
    ₹15 +Tax and Shipping.

    Specifications:

    • Nominal Operating Voltage: 5V
    • Operating Voltage Range: 3.0V to 6.0V
    • Nominal Voltage: 3V
    • No Load Current: 0.27A
    • Maximum Current: 1.05A
    • No Load Speed: 13,500 revolutions per minute (r/min)
    • Maximum Speed: 10,740 revolutions per minute (r/min)
    • Stall Torque: 68g.cm
    • Maximum Torque: 14g.cm
    • Stall Current: 4.10A
    Add to cartDone

  • 60 RPM BO Motor – (Single Shaft) Straight

    0 out of 5
    ₹55 +Tax and Shipping.

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Single D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 60 RPM
    • Rated Torque: 1 Kg/cm
    Add to cartDone

  • 65mm Robot Wheel for BO Motors (Yellow)

    0 out of 5
    ₹18 +Tax and Shipping.

    Specifications:

    • Loading Capacity (Kg): 2.5
    • D hole For BO Motor: 6 mm
    • Weight (gm): 34
    • Wheel Diameter(mm): 65 mm
    • ColorBlack (Tyre): Yellow (Rim)
    • Wheel Width 27 mm
    • Body Material Plastic
    • Grip Material Rubber
    • Center Shaft Hole Diameter
    • 4mm-(round side) and 3.5mm-(flat side)

     

    Add to cartDone

  • BO Motor dual shaft 60 RPM – Straight

    0 out of 5
    ₹55 +Tax and Shipping.

    Specifications:

    • Low density: lightweight, low inertia.
    • Capability to absorb shock and vibration as a result of elastic compliance.
    • Ability to operate with minimum or no lubrication, due to inherent lubricity.
    • The relatively low coefficient of friction.
    • Operating Voltage(VDC): 3~12
    • Shaft Length (mm): 8.5
    • Shaft Diameter (mm): 5.5 (Double D-type)
    • No Load Current: 40-180mA.
    • Rated Speed(After Reduction): 150 RPM
    • Rated Torque: 0.35 Kgcm
    Add to cartDone

  • DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch

    0 out of 5
    ₹100 +Tax and Shipping.

    Specifications:

    • Working voltage: DC4.5V-35V
    • Output: 0-5A 90W
    • PWM duty cycle: 1% -100%
    • PWM frequency: 20KHz
    • Size: 30.5 * 26.5 * 13.5mm
    Add to cartDone

  • GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control

    0 out of 5
    ₹160 +Tax and Shipping.

    Specifications

    • Operating Voltage: 4.8V – 6V DC
    • Output Current: 15mA (5.0V)
    • Output Signal: 1.5ms ± 0.5ms
    • Knob Diameter: 12mm
    • Dimensions: 35×30×15mm (L×W×H)
    • Weight: 8g
    • Shipping Weight: 12g
    • Shipping Dimensions: 6 × 4 × 3 cm
    • Color: Blue
    Add to cartDone

  • GT POWER 3-Channel Multi Servo Tester ESC RC Consistency CCPM Master Speed Control

    0 out of 5
    ₹160 +Tax and Shipping.

    📌 Specifications

    🔹 Operating Voltage: 4.8V – 6V DC
    🔹 Output Current: 15mA (5.0V)
    🔹 Output Signal: 1.5ms ± 0.5ms
    🔹 Dimensions: 35mm x 30mm x 15mm
    🔹 Knob Diameter: 12mm
    🔹 Weight: 8g
    🔹 Color: Blue

    Add to cartDone

  • L298N Based Motor Driver Module

    0 out of 5
    ₹145 +Tax and Shipping.

    Specifications

    • Operating Supply Voltage: Up to 46V
    • Total DC Current: Up to 4A (2A per channel)
    • Logic Voltage: 5V
    • Drive Voltage: 5V – 35V
    • Logic Current: 0-36mA
    • Drive Current: 2A (max per bridge)
    • Maximum Power: 25W
    • Dimensions: 44 x 44 x 28 mm (LxWxH)
    • Weight: 26g
    Add to cartDone

  • Original Chip A4988 Stepper Motor Driver (Red) with Heatsink – 1.5A

    0 out of 5
    ₹92 +Tax and Shipping.

    Specifications

    Parameter Value
    Supply Voltage 8V – 35V
    Operating Current (Without Heatsink) 1A per phase
    Maximum Current (With Heatsink) 2A per phase
    Logic Voltage Input 3V – 5.5V
    Step Modes Full, ½, ¼, ⅛, 1/16
    Protection Features Thermal shutdown, UVLO, short circuit protection
    Additional Cooling Required for operation above 1A
    Add to cartDone

  • Servo SG90 9g 180 Degree

    0 out of 5
    ₹92 +Tax and Shipping.

    Specifications:

    • Universal for JR and FP connector § Cable length: 25cm
    • No load; Operating speed:

    0.12 sec / 60 degree (4.8V),

    0.10 sec / 60 degree (6.0V)

    • Temperature: -30~60’C
    • Dead band width: 5us
    Add to cartDone

  • SimonK 30A BLDC ESC Electronic Speed Controller

    0 out of 5
    ₹370 +Tax and Shipping.

    Specifications

    • Operating Voltage: 2-3S LiPo Battery
    • Current Rating: 30A Continuous, 40A Peak
    • BEC Output: 5V/2A
    • Start Modes: Normal, Soft, Super-Soft
    • Compatibility: Fixed-wing aircraft, helicopters, multi-rotors
    • Safety Features: Backward-polarity protection, 5V receiver line protection
    • Heat Management: Heat sink with thermal membrane
    • Programmability: Fully programmable via RC remote control
    Add to cartDone

  • Submersible Mini Water Pump 3-6V DC

    0 out of 5
    ₹50 +Tax and Shipping.

    Specifications:

    • Operating Voltage: 2.5 ~ 6V
    • Operating Current: 130 ~ 220mA
    • Flow Rate: 80 ~ 120 L/H
    • Maximum Lift: 40 ~ 110 mm
    • Outlet Outside Diameter: 7.5 mm
    • Outlet Inside Diameter: 5 mm
    Add to cartDone

  • TowerPro MG995 Metal Gear Servo Motor (180° Rotation)

    0 out of 5
    ₹285 +Tax and Shipping.

    Specifications

    Parameter Value
    Model MG995
    Weight 55g
    Operating Voltage 4.8V – 7.2V
    Torque @ 4.8V 10kg/cm
    Torque @ 6.6V 12kg/cm
    Operating Speed @ 4.8V 0.20 sec/60°
    Operating Speed @ 6.6V 0.16 sec/60°
    Rotational Angle 180° (±90°)
    Dead Band Width 1 µs

     

    Add to cartDone

End of content

End of content