“ESP32 38Pin Development Board WiFi+Bluetooth” has been added to your cart.
View cart
Showing 61–80 of 151 results
Add to wishlist Compare Quick view
₹ 100 +Tax and Shipping.
Specifications:
Working voltage: DC4.5V-35V
Output: 0-5A 90W
PWM duty cycle: 1% -100%
PWM frequency: 20KHz
Size: 30.5 * 26.5 * 13.5mm
Add to wishlist Compare Quick view
₹ 70 +Tax and Shipping.
Specifications:
Input voltage: 0.9-5V DC
Output voltage: 5V DC
Output Current: 500-600mA
Load regulation: ±1%
Voltage regulation: ±0.5%
Input Terminals: Input: IN + input is level, IN-type negative
Add to wishlist Compare Quick view
₹ 110 +Tax and Shipping.
The DHT11 is a low-cost, pre-calibrated digital sensor designed for precise humidity and temperature measurements. It features resistive humidity sensing and an NTC thermistor for temperature detection, making it ideal for a variety of applications, from home automation to weather monitoring. This module outputs digital data on a single pin, making it easy to integrate…
Add to wishlist Compare Quick view
₹ 180 +Tax and Shipping.
📌 Specifications
🔹 Temperature Range : -40°C to 80°C
🔹 Temperature Accuracy : ±0.5°C
🔹 Humidity Range : 0% – 100% RH
🔹 Humidity Accuracy : ±2% RH
🔹 Response Time : <2 seconds
🔹 Operating Voltage : 3.3V – 5V DC
🔹 Output Signal : Digital (Single-Wire Interface)
🔹 Dimensions : 27mm x 59mm (L x W)
🔹 Weight : ~2.5g
Add to wishlist Compare Quick view
₹ 250 +Tax and Shipping.
Specifications:
Microcontroller: ATtiny85
Interface: USB
Development Environment: Arduino IDE
I/O Pins: 6 (digital, analog, PWM configurable)
PWM Outputs: 3 (expandable via software PWM)
Analog Inputs: 4
Communication: I2C, SPI (via USI)
Power Supply: USB or 6V – 35V DC
Onboard Regulator: 150mA, 5V
Size: Ultra-compact for space-constrained projects
Add to wishlist Compare Quick view
₹ 40 +Tax and Shipping.
📌 Pin Details
🔹 VCC – Power input (3.3V to 5V DC )
🔹 GND – Ground
🔹 DO – Digital Output (High/Low signal based on light intensity )
Add to wishlist Compare Quick view
₹ 40 +Tax and Shipping.
📌 Pin Details
🔹 VCC: 3.3V – 5V DC (Power Input)
🔹 GND: Ground
🔹 DO: Digital Output (0V – 5V)
₹ 85 Original price was: ₹85. ₹ 83Current price is: ₹83. +Tax and Shipping.
Specifications:
Power supply voltage(VCC): 2.0, 3, 5.5 V.
Output high VOH: 0.8VCC V
Output low VOL: 0.3VCC V
Response time (touch mode) : 60 mS
Response time (low power mode) : 220 mS
Can replace the traditional touch of a button
Four M2 screws positioning holes for easy installation
Add to wishlist Compare Quick view
₹ 20 +Tax and Shipping.
The DPDT ON-OFF Rocker Switch is a simple, reliable, and versatile component for powering your electronic projects and devices. Designed for easy installation and operation, this switch is suitable for various applications requiring efficient power control.
Add to wishlist Compare Quick view
₹ 100 +Tax and Shipping.
Specifications:
Supply Voltage: 3.0V – 5.5V
Temperature Range: -55°C to +125°C
Resolution: 9 – 12 bit
Response Time: 750ms per query
Probe Diameter: 6mm
Probe Length: 50mm
Cable Length: 1m
Add to wishlist Compare Quick view
₹ 170 +Tax and Shipping.
Specifications:
Accuracy 2 ppm from 0° C to +40° C
Accuracy 3.5 ppm from -40° C to +85° C
Digital Temp Sensor Output: ±3° C Accuracy
Memory Chips: AT24C02 (2Kbit)
Register for Aging Trim
RST Output/Pushbutton Reset Debounce Input
Two Time-of-Day Alarms
Programmable Square-Wave Output Signal
Fast 400 Khz I2C interface
Add to wishlist Compare Quick view
₹ 160 +Tax and Shipping.
Specifications:
Feature
Details
Type
Digital Multimeter
Display
3.5-Digit LCD
Voltage Measurement
DC: 200mV, 2000mV, 20V, 200V, 1000V AC: 200V, 750V
Current Measurement
DC: 200µA, 2000µA, 20mA, 200mA, 10A
Resistance Measurement
200Ω, 2000Ω, 20kΩ, 200kΩ, 2000kΩ
Impedance
1MΩ
Power Supply
9V Battery (Included)
Probe Length
60 cm
Dimensions
120mm × 70mm × 27mm
Add to wishlist Compare Quick view
₹ 150 +Tax and Shipping.
Specifications:
Detection Range: 3 cm to 80 cm (adjustable)
Output Type: Digital (TTL)
Power Supply: 5V
Current Consumption: 300mA.
Cable length: 50cm
Add to wishlist Compare Quick view
₹ 690 +Tax and Shipping.
Specifications
Parameter
Value
Operating Voltage
3.3V DC
Analog Output
Yes
Temperature Range
-40°C to 90°C
Cable Length
50 cm
Board Dimensions
36mm x 30mm x 18mm
Weight
5g
Connector Type
3.5mm Jack for ECG pads
Add to wishlist Compare Quick view
₹ 199 +Tax and Shipping.
Innovate with Big Electronics and Automation: Turning Your Ideas into Reality At Big Electronics and Automation, we specialize in transforming ideas into reality. With a strong focus on market trends and customer needs, we provide innovative solutions for a wide range of electronics projects. Whether you’re tackling simple circuits or advanced IoT and MCU-based systems,…
Add to wishlist Compare Quick view
₹ 350 +Tax and Shipping.
Specifications
Parameter
Value
Ethernet Standard
10Base-T
Communication Interface
SPI (Serial Peripheral Interface)
Max SPI Clock Speed
20MHz
Crystal Oscillator
25MHz
Ethernet Port
HanRun HR911105A
Supply Voltage
3.3V (5V-tolerant inputs)
Operating Current
~180mA
Board Dimensions
57mm × 34mm × 16mm
Weight
14g
Add to wishlist Compare Quick view
₹ 120 +Tax and Shipping.
Specifications
Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
Protocol Stack: Integrated TCP/IP
Processor: Low-power 32-bit CPU
Communication Interfaces: SDIO 1.1/2.0, SPI, UART
Wireless Technologies: STBC, 1×1 MIMO, 2×1 MIMO
Flash Memory: 1MB (upgraded from 512KB)
GPIO Pins: 2 (for sensors and peripherals)
Wake-up Time: <2ms
Standby Power Consumption: <1.0mW (DTIM3)
Operating Voltage: 3.3V (requires logic level converter for 5V systems)
Compatibility: Arduino, Raspberry Pi, PIC, and other microcontrollers
Dimensions: Compact form factor
Add to wishlist Compare Quick view
₹ 220 +Tax and Shipping.
Specifications:
Wireless Standards: 802.11 b/g/n
Frequency Range: 2.4GHz – 2.5GHz
Data Interfaces: UART, HSPI, I2C, I2S, GPIO, PWM, IR Remote Control
Operating Voltage: 3.0V – 3.6V (Recommended: 3.3V)
Average Current Consumption: 80mA
Operating Temperature: -40°C to 125°C
PCB Size: 25mm × 16mm
Add to wishlist Compare Quick view
₹ 400 +Tax and Shipping.
Specifications:
4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
Ultra-Low power consumption works perfectly with the IDE
Support LWIP protocol, Freertos
Support Three Modes: AP, STA, and AP+STA
ESP 32 is safe, reliable, and scalable to a variety of applications
Add to wishlist Compare Quick view
₹ 840 +Tax and Shipping.
Specifications:
Ultra-Small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-Power Dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports Interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images Wi-Fi upload
Support TF card
End of content
End of content
Load more